stroker crank

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
I have damaged the threads on the front of my crankshaft. I can get a 331 crankshaft fairly cheap. Is it possible to run a stroker crank with stock rods and pistons?
 
Unfortunately no it will not.

You have a 3" crank throw stock with a 5.090" rod, and a 1.6" compression height piston.

By adding a 3.25" crank (331 crank, with 1/4 in.), it just will not work without sticking the piston out of the top of the deck.