• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Stud mount rocker arm question

  • Thread starter Thread starter gtcobra302
  • Start date Start date Mar 12, 2006

gtcobra302

Member
Sep 6, 2005
118
1
16
Centra Florida
Mar 12, 2006
#1
  • Mar 12, 2006
  • #1
These are probley stupid questions but, Do you use poly locks on every rocker arm? And also why cant I just put the rocker arms on and tighten the locks down tight and screw the allen bolt in the middle?
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Mar 12, 2006
#2
  • Mar 12, 2006
  • #2
some rockers, like the comp magnum roller tips use just a lock nut.

rockers that provide poly locks: use them-that's what they're meant for. I guess I'm not quite seeing what you're saying about the tightening procedure. Now, this is only what works for me, but; take out the lash +1/4 turn, snug the allen lock, then tighten another 1/4 turn, and I've never had a problem with them.
 

gtcobra302

Member
Sep 6, 2005
118
1
16
Centra Florida
Mar 13, 2006
#3
  • Mar 13, 2006
  • #3
I am using a half of a set of 1.6's and a half a set of 1.7's, do I use poly locks on both, the 1.6's are blue racer, and the 1.7's are crane or comp. Do I just use lock nuts on one and poly locks on the other?
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Mar 13, 2006
#4
  • Mar 13, 2006
  • #4
You can use whatever works. I have the Comp adjustable type, and the locknuts have worked fine for 15 years.

If you do frequent adjustments, the polylocks are probably more dependable for staying in the adjusted position.
 
You must log in or register to reply here.

Similar threads

G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
753
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
D
Rockers, lash adjusters and timing: help with parts (4.6 2v)
  • dvigAtel
  • Nov 1, 2025
  • Other Auto Tech
Replies
0
Views
389
Other Auto Tech Nov 1, 2025
dvigAtel
D
S
New misfire after replacing valve seals/springs.
  • SpeedofDarkness
  • Aug 24, 2025
  • SN95 V6 Mustang Tech
Replies
0
Views
319
SN95 V6 Mustang Tech Aug 24, 2025
SpeedofDarkness
S
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
555
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?