• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Stud mounted rockers

  • Thread starter Thread starter JerseyGT
  • Start date Start date Jun 4, 2006
J

JerseyGT

New Member
Jan 26, 2002
32
0
0
South NJ
Jun 4, 2006
#1
  • Jun 4, 2006
  • #1
how do you adjust it and do i just torque it down like as if it was pedastal rockers?
 
R

R2D2

Jun 4, 2006
#2
  • Jun 4, 2006
  • #2
is this a hydraulic roller cam?
 
J

JerseyGT

New Member
Jan 26, 2002
32
0
0
South NJ
Jun 4, 2006
#3
  • Jun 4, 2006
  • #3
its for my 90gt. got a 306. bought a dss long block it was one but win i started it . it had a knocking noise and i tot i drop sumthing in it. so i took off da heads. but there's nothing.

306.5.0
dss 1.6 stud mounted rockers
TFS stage 2 cam
 
J

JerseyGT

New Member
Jan 26, 2002
32
0
0
South NJ
Jun 4, 2006
#4
  • Jun 4, 2006
  • #4
not mine a friends
 
R

R2D2

Jun 4, 2006
#5
  • Jun 4, 2006
  • #5
as for adjusting them, each rocker you adjust the cam has to be on the base circle of the cam , then take out all the excess lash, there will be no slop in the pushrod, but it wont be pushing down the lifter plunger, then go 1/2 turn more and secure the allen head locking nut in the rocker. Do that for each rocker
 
J

JerseyGT

New Member
Jan 26, 2002
32
0
0
South NJ
Jun 4, 2006
#6
  • Jun 4, 2006
  • #6
Thanks man, I'll post back if any further problems
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,376
18,123
224
Massachusetts
Jun 4, 2006
#7
  • Jun 4, 2006
  • #7
Are you still using factory pushrods?

You need to upgrade to hardened pushrods as the stock ones will rub the guideplates and shave small bits of metal off.

Also, you will need to measure for correct pushrod lenght.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 4, 2006
#8
  • Jun 4, 2006
  • #8
sbftech said:
as for adjusting them, each rocker you adjust the cam has to be on the base circle of the cam , then take out all the excess lash, there will be no slop in the pushrod, but it wont be pushing down the lifter plunger, then go 1/2 turn more and secure the allen head locking nut in the rocker. Do that for each rocker
Click to expand...
this is right but in order to find the base circle of the cam plz follow these instructions.
http://www.compcams.com/Technical/Instructions/Files/250.pdf
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
524
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
68 vert where to start?
  • 67 blueberry
  • Jul 2, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
149
1965 - 1973 Classic Mustangs -General/Talk- Jul 2, 2026
67 blueberry
J
Exhaust manifold to Y-pipe nut & stud dimensions?
  • joeybuddy96
  • Jul 7, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
225
SN95 V6 Mustang Tech Jul 9, 2026
joeybuddy96
J
Engine Roller Rocker Stud Size, GT40P heads
  • foxbodyclark
  • Jan 25, 2025
  • Fox 5.0 Mustang Tech
Replies
14
Views
2K
Fox 5.0 Mustang Tech Jan 26, 2025
2000xp8
G
Sup. Just got back into the game with a 1986 4-eye vert.
  • GeorgeG
  • Nov 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
164
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 7, 2026
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?