Stud mounted rockers

its for my 90gt. got a 306. bought a dss long block it was one but win i started it . it had a knocking noise and i tot i drop sumthing in it. so i took off da heads. but there's nothing.

306.5.0
dss 1.6 stud mounted rockers
TFS stage 2 cam
 
as for adjusting them, each rocker you adjust the cam has to be on the base circle of the cam , then take out all the excess lash, there will be no slop in the pushrod, but it wont be pushing down the lifter plunger, then go 1/2 turn more and secure the allen head locking nut in the rocker. Do that for each rocker
 
Are you still using factory pushrods?

You need to upgrade to hardened pushrods as the stock ones will rub the guideplates and shave small bits of metal off.

Also, you will need to measure for correct pushrod lenght.
 
sbftech said:
as for adjusting them, each rocker you adjust the cam has to be on the base circle of the cam , then take out all the excess lash, there will be no slop in the pushrod, but it wont be pushing down the lifter plunger, then go 1/2 turn more and secure the allen head locking nut in the rocker. Do that for each rocker
this is right but in order to find the base circle of the cam plz follow these instructions.
http://www.compcams.com/Technical/Instructions/Files/250.pdf