subframe connector recommendations?

TomOsiris

Member

May 19, 2019

68

16

18

CT

May 31, 2019

#1

• May 31, 2019

• #1

Subframe connectors - I know I need them, but there are a ton of options out there. Looking for advice from the community, seeing if there is a consensus best option for my car. Clean, rust free 89 GT, ~300 rwhp range. I admittedly don't know much about the differences between all the brands/options. Yes I looked through the forums before posting.

 

darkfader

5 Year Member

Feb 16, 2017

249

342

83

Davis, WV

May 31, 2019

#2

• May 31, 2019

• #2

Maximum Motorsport full length. Weld in. You can get them bare and finish yourself after they are welded in or powder coated, but the powder coat would have to be taken down to bare metal at all the welds anyway for a good weld.

 

Reactions: TomOsiris

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,167

17,862

224

Massachusetts

May 31, 2019

#3

• May 31, 2019

• #3

Street car...max motorsports full lenght.

Race car....thru the floor SFCs from global west

 

Wolf_Fox

Member

May 26, 2019

19

3

13

California

May 31, 2019

#4

• May 31, 2019

• #4

I actually have always preferred to build my own. The cost of some steel tubing is considerably cheaper than any pre-fabbed options on the market. And they get welded up anyway.
There are tons of schematics around also.