Suggestions please...

[Ogre]

I am open to suggestions on how I should complete my Granada disk brake swap on my 67 Stang. Here is where I'm at... I got everything done but am stuck trying to adapt my hard brake lines to the Granada flexible brake hose that connects to the calipher. I made new hard brake lines that connect to the old brake lines just through the shock towers, in the engine compartment. I know that the flex brake hose has a bigger size fitting than what came on the 3/16 line I bought. Is there an adapter for this? Better yet, can I buy a fitting that fits on the 3/16 line so I won't have to use an adapter. I have searched a few local auto parts stores brass fittings for a way to attach the lines, but no joy. Any help would be greatly appreciated. Thanks.

 

[bnickel]

I am open to suggestions on how I should complete my Granada disk brake swap on my 67 Stang. Here is where I'm at... I got everything done but am stuck trying to adapt my hard brake lines to the Granada flexible brake hose that connects to the calipher. I made new hard brake lines that connect to the old brake lines just through the shock towers, in the engine compartment. I know that the flex brake hose has a bigger size fitting than what came on the 3/16 line I bought. Is there an adapter for this? Better yet, can I buy a fitting that fits on the 3/16 line so I won't have to use an adapter. I have searched a few local auto parts stores brass fittings for a way to attach the lines, but no joy. Any help would be greatly appreciated. Thanks.

check out www.discbrakeswap.com Degins has the fittings you need i believe he also has a set of soft lines that will adapt the granada brakes to the stock hard lines as well.

you might also check with Ultrastang, i think he may have some of the adapters or at least the Weatherhead numbers for them, IIRC.

 

[Ogre36]

Thanks bnickel.

www.ultrastang.com

He has what I need. Thanks again for the help.