I have narrowed it down to what suspension I want. Im going w/ the Tokico Illuminia 5 way adjustibles but should I get them w/ new springs or are my FMS C Springs good enough for what I want. Im not building a radical suspension set up and I dont plan on doing any road coarse racing. I just want something that has good manners on the street and will help me out at the track.Where I plan on getting the coil overs the price diffrence is $115 for the ones that come w/ the springs in the Kit VS the ones that have no springs. So is it worth spending the extra $115 to get the springs that they have made for the kit or are my FMS C springs just fine for what I want ?
Also I want to get a set of Upper/lower rear control arms how much diffrence is there between diffrent kinds. Such as I see UPR aluminum ones for $200 and some from like blue oval industries for $150 that are listed as heavy duty ULCA but not made from aluminum. Is this something you should only stick w/ brand names and spend the extra money for the more expensive ones is this one of the parts you can buy the less expensive one and still get the same results as the higher priced ones? Both have polyurethane bushings.
Also I want to get a set of Upper/lower rear control arms how much diffrence is there between diffrent kinds. Such as I see UPR aluminum ones for $200 and some from like blue oval industries for $150 that are listed as heavy duty ULCA but not made from aluminum. Is this something you should only stick w/ brand names and spend the extra money for the more expensive ones is this one of the parts you can buy the less expensive one and still get the same results as the higher priced ones? Both have polyurethane bushings.