suspension

Newbie143 · Sep 22, 2005

people say no matter what kinda HP you got it wont matter if you cant get that power to the ground with good suspension.
my question is , by getting 275 tires (front) and 315 for the back. will that be enough to get that power to the ground , or do i still need suspension work?
kepp in mine car will stay N/A for now.

and if i do need suspension work , please tell me what i will need as a start.
thx

KronicRacer · Sep 22, 2005

subframe connectors full length are the way to go. tighten up the chassis, front strut tower brace, rear stb, k memeber brace.
or
you can address the lower control and upper control arms in the rear axel housing

Kilgore Trout · Sep 22, 2005

I think the quickest way to improve launch would be gears, then shocks and struts, then UCA/LCA, then SFCs.

Then he could start working on the front suspension parts like front STB, better a-arms, real ball joints, real tie rod ends, better bushings...

Also, no way would I do the K member or the rear STB... The K member is too extensive and expensive of a mod and is only for actual race cars IMHO. The rear STB messes up the trunk interior trim and does not gain enough to justify messing up the already limited space in the trunk.

lgndracer · Sep 22, 2005

Kilgore Trout said:
Also, no way would I do the K member or the rear STB... The K member is too extensive and expensive of a mod and is only for actual race cars IMHO. The rear STB messes up the trunk interior trim and does not gain enough to justify messing up the already limited space in the trunk.

I think he meant the K-Member brace. They are fairly inexpensive. I have one, but am not sure of the difference it made by itself. I added it at the same time I did the Extreme Matrix System, so as a whole, that package made a HUGE difference. I would highly recommend it.

KronicRacer · Sep 22, 2005

yea man k member brace

i dont think hes ready for a full k memeber unit. LOL

ive had no issues with the rear brace and its a great rienforcement for the shock area in the rear.

also those rear shock towers do move you can hear it after the installation if not tightened up fully. it does take up trunk space which is a big downside for some people. its not for me. meh to each his own and remember these are also suggestions not the law written in stone.

SilverBullet00 · Sep 22, 2005

You need to transfer that power to the rear wheels, Id go with LCA's, springs, shocks, struts, and subframes.... That will much improve your launch and 60' times.

tomustang · Sep 22, 2005

Newbie143 said:
people say no matter what kinda HP you got it wont matter if you cant get that power to the ground with good suspension.

not if you accelerating in a straight line already.

Newbie143 said:
my question is , by getting 275 tires (front) and 315 for the back. will that be enough to get that power to the ground , or do i still need suspension work?
kepp in mine car will stay N/A for now.

and if i do need suspension work , please tell me what i will need as a start.
thx

It depends what you're looking for.

KronicRacer · Sep 22, 2005

i agree with tom we need more info on what the cars dutys are going to be. i mean obviously its a daily driver/stop light warrior? with that kenny brown quote you posted im thinking road racer.

Newbie143 · Sep 22, 2005

KronicRacer said:
i agree with tom we need more info on what the cars dutys are going to be. i mean obviously its a daily driver/stop light warrior? with that kenny brown quote you posted im thinking road racer.

yes it is a daily driver.and it will stay N/A . so from what you guys said, i'm guessing the 315 back tires wont be enough to put the power down huh.
my plan is to make it a full bolt-on daily driver. Cams will be installed in a later step but not any time soon.this all doesnt matter right now.
so here ,i think this is enough info to get my answer
thx guys

KronicRacer · Sep 22, 2005

315s will help a bit its only part of the equation what good are big tires if the chassis is still twisting and the axel still rolls. you will need torque box rienforcements full length subs MM or steeda will have those will help in this dept. adjustable lca's, hd uca's will help transfer power.

suspension

Newbie143

New Member

KronicRacer

Member

Kilgore Trout

Fried or Broiled ?

lgndracer

New Member

KronicRacer

Member

SilverBullet00

New Member

tomustang

Psychotic Member

KronicRacer

Member

Newbie143

New Member

KronicRacer

Member

Similar threads

suspension

New Member

Member

Fried or Broiled ?

New Member

Member

New Member

Psychotic Member

Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency