• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Swap '94 engine into '89 engine bay???

  • Thread starter Thread starter ARMAGEDON
  • Start date Start date Sep 15, 2005

ARMAGEDON

Member
Apr 2, 2005
100
0
17
Sep 15, 2005
#1
  • Sep 15, 2005
  • #1
I was thinking about swapping my '94 347 engine into my '89. Will it work easily? Are all the mounts and connections the same?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 15, 2005
#2
  • Sep 15, 2005
  • #2
One for one swap - a 302 block is the same, no matter what year it was made. The mounting holes for everything will be in the right places. The electronics are a different story. You will need a 89 engine wiring harness, TFI module & distributor. The intake manifold will need the crook elblow removed to clear the hood. You will need a 86-93 EGR spacer to mate the TB to the manifold. There are some other small differences, but I can't remember them at this time.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 15, 2005
#3
  • Sep 15, 2005
  • #3
The timing cover and accessory spread is different, but I dont know why this swap would require any moving of stuff (the SN accessories appear to be a little lower and wider, to me. Should work in a fox though). It is even easier if you did a fox intake conversion already.

Good luck.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 15, 2005
#4
  • Sep 15, 2005
  • #4
Oh yeah, one of the SN guys asked this same thing on the SN side a month or so ago (or was it you? I thought it was someone with a '95 with a 347 wanting to install the goods in a fox). That person might have more info about little stuff for the swap.

A search on the PIH retrofit might help with wire chasing/converting, depending upon how you choose to pursue it.
Good luck.
 
You must log in or register to reply here.

Similar threads

F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Sep 7, 2026
Kleinjj27
K
Brakes Front Brake Hardline Routing
  • 93Nifty
  • Sep 11, 2026
  • Fox 5.0 Mustang Tech
Replies
11
Views
390
Fox 5.0 Mustang Tech Oct 11, 2026
limp
M
3d scans of 67-68 engine bay?
  • Margrave30
  • Jul 27, 2026
  • Classic Mustang Specific Tech
Replies
1
Views
117
Classic Mustang Specific Tech Jul 27, 2026
Noobz347
Electrical Parasitic Draw, Fuse 8
  • N8827N
  • Sep 15, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
276
Fox 5.0 Mustang Tech Sep 18, 2026
AeroCoupe
7
What megasquirt kit to order
  • 74delta
  • Jul 4, 2026
  • Digital Self-tuning Forum
Replies
15
Views
647
Digital Self-tuning Forum Aug 26, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?