T-45 T/O Bearing issue

L

LaffnJack

New Member

Aug 8, 2004

11

0

0

Sunny Southern Cali

Aug 8, 2004

#1

• Aug 8, 2004

• #1

Hello to all.

I have been a long time lurker, but decided to register in the hopes that someone would be able to help me with my current problem. The problem is that I have gone through 4 t/o bearings in the last 20k miles. I am looking for possible reasons for this impressive failure rate. I do not ride the clutch pedal, so that is out. But other than that, all suggestions are welcome.

Thanks in advance,
-J-

 

C

chuckystang

New Member

Jul 12, 2004

217

0

0

Aug 8, 2004

#2

• Aug 8, 2004

• #2

sorry i cant tell you why or help you, other than i have had thos problems as well, i got a t45 with centerforce DF.

 

COBRA90GT

Mustang Master

Sep 22, 2001

6,654

0

87

HOCKEYTOWN ® , MI

Aug 8, 2004

#3

• Aug 8, 2004

• #3

Might want to get in touch with Joe Lynch, he could probably offer some further insight:

Recent throw-out bearing thread from BON Cobra forum

Link to his homepage: http://www.lx.net/jlynch

 

L

LaffnJack

New Member

Aug 8, 2004

11

0

0

Sunny Southern Cali

Aug 9, 2004

#4

• Aug 9, 2004

• #4

Thank you COBRA90GT. I will give that a try. Hopefully there is an answer somewhere.

-J-

 

9

98svtconvert

New Member

May 26, 2004

85

0

0

va beach, va

Aug 10, 2004

#5

• Aug 10, 2004

• #5

please post what ever you find. mine has less than 5000 miles on it and it squeels. i don't want to go through a bunch of them. they aren't fun to change.

 

L

LaffnJack

New Member

Aug 8, 2004

11

0

0

Sunny Southern Cali

Aug 10, 2004

#6

• Aug 10, 2004

• #6

I will keep everyone posted. It seems like a more common problem than I orginially thought. The search goes on.

-J-

 

F

fireman2004

New Member

Apr 17, 2004

14

0

0

Tampa Bay,Florida

Aug 14, 2004

#7

• Aug 14, 2004

• #7

Having same problem here also with 96 cobra t/o bearing 8000 miles and it's squeeking. Nobody seems to be able to pinpoint the problem. I'm lost here myself, and hate changing them,specially with longtube headers. Oh well hope we get an answer someday

 

TXSnakeCharmer

Founding Member

Jul 16, 2001

1,582

0

36

DFW Texas

Aug 14, 2004

#8

• Aug 14, 2004

• #8

I had some TOB issues with mine and found my problem which has cure it since. You can check out my tranny page about 3/4 way down for the TOB. My opinion is Ford has a bad design on these cars with the tranny used.

http://www.shane.roberts.net/trans.htm

 

C

chuckystang

New Member

Jul 12, 2004

217

0

0

Aug 15, 2004

#9

• Aug 15, 2004

• #9

hey, great post and article, but is this such a concern that it is doing damage, because I had a performance shop look at mine and they just said no need to go replacing the clutch again, all those parts that you mentioned. but do you think that could do damage to a transmission or something, because i just dont want to go wasting money on another clutch and throwout bearing yada yada yada, id rather get some 410 gears what do you think? your final thoughts ? lol

 

F

fiveofanatic

How to fuel a Mustang:

Founding Member

Aug 12, 1998

8,152

0

76

Phoenix, AZ suburbs

Aug 16, 2004

#10

• Aug 16, 2004

• #10

Mine clatters like crazy at idle with the accessories on. I figure I'll live with it until I finally smoke the clutch.

 

AzDropTop

Founding Member

Mar 11, 2001

138

0

0

Tucson, AZ

Aug 24, 2004

#11

• Aug 24, 2004

• #11

Put in a new clutch and TOB at 40K miles or so and it started making noise after about 500 miles on and off. Put on a Firewall adjuster and it seemed to help for awhile, but it is acting up again now at about 50 k miles. Drives me insane.

 

BLK_ROUSH

Founding Member

Feb 5, 2000

1,300

0

36

Newnan, GA

Aug 25, 2004

#12

• Aug 25, 2004

• #12

TXSnakeCharmer said:

I had some TOB issues with mine and found my problem which has cure it since. You can check out my tranny page about 3/4 way down for the TOB. My opinion is Ford has a bad design on these cars with the tranny used.

http://www.shane.roberts.net/trans.htm

Click to expand...

Great breakdown with pictures ...... Appreciate it.

 

AzDropTop

Founding Member

Mar 11, 2001

138

0

0

Tucson, AZ

Aug 26, 2004

#13

• Aug 26, 2004

• #13

chuckystang said:

hey, great post and article, but is this such a concern that it is doing damage, because I had a performance shop look at mine and they just said no need to go replacing the clutch again, all those parts that you mentioned. but do you think that could do damage to a transmission or something, because i just dont want to go wasting money on another clutch and throwout bearing yada yada yada, id rather get some 410 gears what do you think? your final thoughts ? lol

Click to expand...

Eventutally you can trash the input shaft on the tranny and thus, ruin the tranny.

 

B

blk32V

New Member

Apr 10, 2003

130

0

0

Portage, IN

Aug 27, 2004

#14

• Aug 27, 2004

• #14

My t/o bearing from www.ddperformance.com lasted about 35,000 miles or so until it started to squeal and my clutch is also going out now. I believe that its a Valeo t/o bearing.

 

L

LaffnJack

New Member

Aug 8, 2004

11

0

0

Sunny Southern Cali

Aug 27, 2004

#15

• Aug 27, 2004

• #15

Hello to all,

This is an update and a special thanks to TXSnakeCharmer. My t/o bearing problem has not been a squealing issue, but a popping one. My first t/o went out with that standard squeal at 30k. The next started popping 5k later. New t/o bearing and the popping went away. However, it liked to come back at 3k to 5k intervals. Needless to say, it began to get a little annoying. This last time it started, I started this thread. That is the history.

By luck I stumbled over TXSnakeCharmer's site. I was looking at his Velocity Tube set-up and saw his link for his T-45 fix. He discribed my problem exactly and his fix for it. I figured that just changing out the t/o bearing was not solving the problem so why not try someting different. I already have the transmission out, (at least the shop did) what is another $40 in parts. So I replace the clutch release arm, pivot bolt, and t/o bearing. Added a little hi-temp grease and prayed that this would solve my problem. I did notice that the old release arm and pivot bolt were pretty worn. That has helped my faith that this might fix my problem. So far, so good. Put a thousand miles on her since the change. Keeping my fingers crossed.

Anyway, thank you TxSnakeCharmer. That site of yours is truely appreciated.

-J-

P.S. Sorry for the long post