T5 Clutch Pedal Assembly

doobsstang · Jul 8, 2008

I am in the middle of doing my AODE to T5 conversion and it seems MPS sent me the wrong pedal assembly. I am not certain so I thought I would ask StangNet for some help. The old assembly I took out has a rubber hose connected to the brake pedal. Looks like some sort of plunger switch...(not sure how to explain any better) The new one needs an electrical connector. Is the T5 pedal assembly any different how the brake pedal is setup? I cannot seem to find a connector that will fit for the one MPS sent me. Any ideas? It is pretty much the last thing I need to do to get this thing running again.

95trippleblack · Jul 9, 2008

Here are the 2 side by side form my 95. Both uses an electrical connector on the booster rod
View attachment 311539

These two hook up the the switches on the drivers side of the assembly

Remove this jumper so it wont start without the clutch petal down

Autos use the green jumper and sticks you remove the jumper and put on that switch with the wire coming out of it

Don't forget you will need a t5 computer or a chip from a 5 speed

doobsstang · Jul 9, 2008

Yeah, thats what I need. I guess I have the wrong one. Well I looked through my paperwork and it was not MPS, it was Prestige Mustangs out of Georgia. I called them up and they are trying to figure out what to do about it. Thanks for the pic.

T5 Clutch Pedal Assembly

doobsstang

Member

95trippleblack

Member

doobsstang

Member

Similar threads

T5 Clutch Pedal Assembly

doobsstang

Member

95trippleblack

Member

doobsstang

Member

Similar threads

Privacy & Transparency

Privacy & Transparency