I have an old T-5 that I think came from a 4cyl. The ID tag is missing. I would like to know what gear ratios are in the box without opening it up.
Here is what I do know. The input shaft is a smaller diameter than what was stock on my 5.0 GT. The GT measured .668 and the unidentified shaft measured .5900. The Front shaft sleeve on the unidentified tranny is aluminum and the stock GT tranny is steel. I did not think to look at the speedo drive gears.
If anyone who knows more about these trans. could chime in with info I would appreciate it.
Here is what I do know. The input shaft is a smaller diameter than what was stock on my 5.0 GT. The GT measured .668 and the unidentified shaft measured .5900. The Front shaft sleeve on the unidentified tranny is aluminum and the stock GT tranny is steel. I did not think to look at the speedo drive gears.
If anyone who knows more about these trans. could chime in with info I would appreciate it.