Progress Thread Tannerc91gt’s Build(s) Thread

tannerc91gt · Feb 26, 2018

Continuing to update this thread for now, though I’m trying to come up with a better place to document the build. Not sure I’m into the Facebook page for a car build thing, just seems a little weird to me.

Anywho....

I cut out the coilover cross bar I had made. I think it would have worked but I also felt the coils got a little too close to the housing brackets and it was going to bother me until I did something about it.
New mount lays the shocks back a little further and I’m really pleased with it.

Also got some work done inside the car. Put the dash back in and ran some wiring.
Modified the console for my shifter and gave it a test fit.

RaggedGT · Feb 26, 2018

Always trying to leave man lol
The rear end/suspension turned out great ,and I’m digging how you laid out the electronics/wiring-Whays next?

95BlueStallion · Feb 26, 2018

Man, clean work. I like what you did with the shifter.

Davedacarpainter · Feb 26, 2018

Like always @tannerc91gt , beautiful work. You’re able to do things that are beyond me. I really like how the shifter turned out too.

tannerc91gt · Feb 27, 2018

RaggedGT said:
Always trying to leave man lol
The rear end/suspension turned out great ,and I’m digging how you laid out the electronics/wiring-Whays next?

Really need to get the pinion installed in the rear so I can measure for axles. Going to start building the trunk floor this weekend and start working my way back towards the front of the car

95BlueStallion · Feb 27, 2018

You do really nice clean work, and set a good example for the rest of us to follow.

90sickfox · Feb 27, 2018

That car looks GREAT !!!!

I'm really liking how the shifter sits in the console.

RaggedGT · Feb 27, 2018

tannerc91gt said:
Really need to get the pinion installed in the rear so I can measure for axles. Going to start building the trunk floor this weekend and start working my way back towards the front of the car

Are you going to mount the fuel cell through the floor?

tannerc91gt · Feb 28, 2018

RaggedGT said:
Are you going to mount the fuel cell through the floor?

Bottom of the cell will be a couple inches below the trunk floor. Or at least that’s the plan in my head right now.

tannerc91gt · Mar 2, 2018

Tried to update but unable to upload photos it seems

A5literMan · Mar 2, 2018

Noobz made comment that you need to clear your browser after the changes he made. Can see if that helps?

RaggedGT · Mar 2, 2018

I was trying to find an article I saw about a magazine building a twin turbo Sn car-they did a custom floor around/under there fuel cell so they could submerge the bottom/sides in an ice bath. Had a drain and everything lol..Was pretty neat,can’t find the article now....

tannerc91gt · Mar 2, 2018

A5literMan said:
Noobz made comment that you need to clear your browser after the changes he made. Can see if that helps?

I cleared everything on my browser. Had to re-log in. Says my images are too large.

Noooooooooobz

Noobz347 · Mar 2, 2018

tannerc91gt said:
I cleared everything on my browser. Had to re-log in. Says my images are too large.

Noooooooooobz

New hardware today. Lemme look.

Noobz347 · Mar 2, 2018

tannerc91gt said:
I cleared everything on my browser. Had to re-log in. Says my images are too large.

Noooooooooobz

Gimme a screen shot of the error.

tannerc91gt · Mar 2, 2018

tannerc91gt · Mar 2, 2018

Oh, so I can upload THAT picture

95BlueStallion · Mar 2, 2018

I tried to upload a pic of my neighborhood GLX to Dave's thread and got the same error. Anywho, you have your car running yet? At the rate you work, Im pretty sure you should already have dyno numbers and track slips too.

Noobz347 · Mar 3, 2018

tannerc91gt said:
Oh, so I can upload THAT picture

Try your other images again. If it still doesn't work, send it to Noobz@stangnet.com so that I can take a look at it.

Noobz347 · Mar 3, 2018

tannerc91gt said:
Tried to update but unable to upload photos it seems

I'm looking into this guys. The settings in the forum appear to be correct but the server is refusing to process the images. I've elevated this to MRaburn and I'll holler back once I have either an answer or a solution.

I'm hoping it will be a solution because this all worked before the hardware swap yesterday. It may be some global setting outside of our forum software.

Progress Thread Tannerc91gt’s Build(s) Thread

This last 25% is foreign territory at this point

Been here over a DECADE and still no CT

My assy trans to myself

Chicks can make things hard if they’re inspired...

This last 25% is foreign territory at this point

My assy trans to myself

Wasn't a pretty sight...and I've got big hands

Been here over a DECADE and still no CT

This last 25% is foreign territory at this point

This last 25% is foreign territory at this point

At least it is lumpy...

Been here over a DECADE and still no CT

This last 25% is foreign territory at this point

Stangnet Facilities Maint Tech... Er... Janitor

Stangnet Facilities Maint Tech... Er... Janitor

This last 25% is foreign territory at this point

This last 25% is foreign territory at this point

My assy trans to myself

Stangnet Facilities Maint Tech... Er... Janitor

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Privacy & Transparency

Privacy & Transparency