TB Injection Install (Aces Killshot)

Blackhawkxx · May 20, 2024

LILCBRA said:
BUT, I guess I'll have to live with it. I may even try experimenting on it just to see if I can make it look a little more proportional. It looks like I can cut about an inch from the overall height....

Looks like it's sitting on the mounting bolts, that is making is look worse. You might want to drill the holes or remove the studs so it sits down before cutting the scoop. If you are looking for our opinions, some more photos from different angles might help but if not that's cool.

LILCBRA · May 20, 2024

Yeah, it's sitting on the studs which sits it an inch taller than it would if it was mounted. It looks like it would be impossible to remove the studs safely with how they molded them in. In any event, it covers probably 3/4 of the hood front to back. I did some preliminary measuring and it looks like I could cut 2 inches from the height before it'd cause interference issues again. I marked a line at 1 inch and might try cutting it down tomorrow.

This brings up the issue with drilling the hood to clear the mounting studs. The scoop will inevitably move back proportional to how much material I remove. I've not actually measured to tell you a concrete number, but it looked like it'll move the scoop back about an inch and the front "legs" should move back about the same. So removing an inch from the height should shorten the length by about 2 inches. That's about the same length as the witness marks from the previous scoop, so I think that just might be what the doctor ordered.

2Blue2 · May 20, 2024

I think its gonna look good!
Its gonna be neat!

LILCBRA · May 21, 2024

Blackhawkxx said:
Did you buy the last one because it is showing unavailable for me?

Amazon is back to saying there's 1 in stock again.

Noobz347 · May 21, 2024

That's the one they've had taped to the top of the forklift in the warehouse.

I'm sure it's fine

LILCBRA · May 21, 2024

Got home from work and went straight to cutting the scoop down. Here's a few pics of the progress.

I still have to do some cleanup on the cuts, remove material around the studs, shorten the studs, and there will be a couple mounting holes for the old scoop that'll need some kind of attention. But if you can see it in your mind's eye, it looks like it'll be a better fit size-wise, at least as far as I'm concerned.

LILCBRA · May 21, 2024

Got the stuff done that NEEDED done today, so I got back at this. I got the fiberglass buildup and resin cut away from the studs and made a cardboard template to locate the mounting holes. All 4 actually intersected the hood framework, so I'll have a little more to do to get it mounted, but I was able to get enough clearance in the holes to get it more or less mounted in place. There's about an inch of clearance between the scoop and air cleaner which should allow for the hold down nut and a little more space for movement. It's gonna take some getting used to seeing this monster scoop vs the old one, but I think it's not all bad.

Note the bad spot on the hood - definitely showing it's age now! And you can see where the old scoop sat for the last ~20 years.

LILCBRA · May 21, 2024

Went back out for a comparison shot between the one I grabbed from a Google search that I posted last week and one from tonight as close as I could make it.

It looks more proportional to me....

Blackhawkxx · May 21, 2024

Looks good. Is it going to be black or do you have something else in mind?

LILCBRA · May 21, 2024

Thanks! It'll be black, but I'm not sure if it'll get striped with the rest of the hood. In fact, I'm wondering if I should either NOT restripe it or go with the 78 style stripe instead. While I love the dual stripes, it doesn't look like the outer pin stripe will fit. And I don't think I like the stripes as much without that, so....

Noobz347 · May 21, 2024

Yours looks better than the image you're working from.

Might I suggest some billet mesh for the opening:

Perforated Hexagon Aluminum Grill Mesh Sheets by customcargrills

Perforated Hexagon Grill Mesh made from quality aluminum. This 1/4" honeycomb mesh is available in Silver, Flat or Gloss Black in sizes up to 24" x 60".

www.customcargrills.com

LILCBRA · May 22, 2024

Noobz347 said:
Yours looks better than the image you're working from.

Might I suggest some billet mesh for the opening:

I agree, it needs something to both protect the air cleaner and engine bay and something to kinda help aesthetically. I'll order some mesh of some kind and see about getting that installed before getting it mounted. My initial thoughts were along the lines of horizontal bars or something, kinda like I did to my grill, but hadn't thought too deep about it or how to get it done. Mesh sounds like a better idea.

Blackhawkxx said:
Looks good. Is it going to be black or do you have something else in mind?

Been thinking on a scheme for this this morning. I'm not quite sure how it'd turn out, and I'm not even sure when it'd actually happen with all of the other stuff I have going on. But I was thinking of a modified scheme using 78 style over the car stripes and 75-77 side stripes and the Cobra fender snake, but the stripes have the red in place of the body color showing through. That way they'd match the over the car stripe, like below:

Or just keep the same scheme but have the wider stripes narrowed a little in order to fit all 4 stripes over the scoop. That seems like the best looking option to me.

I've also thought of NOT striping the car again. But I think it would look naked without them.... lol

2Blue2 · May 24, 2024

More proportional, the one you got.
I think it looks mean.
Might go the same way myself ....

LILCBRA · Nov 26, 2024

I figured I'd give a quick update on this even though I've not really driven the car since I posted in April.

First thing, now that I've gotten the water pump and accessory drive squared away (more on that here), is that I love how it fires right up now! I don't have to continually crank it to ensure the fuel bowls are full, pump the pedal at all, or generally do the things you associate with a carbed vehicle that's been sitting. I just turn the key for a split second for the pump to prime and start it - and I don't even need to let the pump prime, it'll do it regardless! I still have a few loose ends to tie up before I can take it on a drive again, but it's working well as it is right now!

LILCBRA · Nov 29, 2024

Man, I need to lose weight.... lol

View: https://youtu.be/MdXMxdecYdE?si=2EzCNPUVnxGuIxFL

2Blue2 · Nov 30, 2024

Reach in and fire on the cold start!
Yes! Winner! Heck Ya!

LILCBRA said:
Man, I need to lose weight.... lol

We look related...

LILCBRA · Nov 30, 2024

2Blue2 said:
Reach in and fire on the cold start!
Yes! Winner! Heck Ya!

We look related...

Maybe we are..... I mean we have similar tastes in cars.... lol

Blackhawkxx · Nov 30, 2024

I'll be interested in hearing your thoughts on FI vs Carb next year when you get to drive it more. Things to note, tip in just going down the road, smashing the gas in a higher gear and a lower gear, flat out high gear pull and of course seat of the pants HP feeling.

2Blue2 · Dec 1, 2024

LILCBRA said:
But I was thinking of a modified scheme using 78 style over the car stripes and 75-77 side stripes

This!
I've had thoughts along this line as well ...

LILCBRA · Dec 1, 2024

See?! We are related!!

TB Injection Install (Aces Killshot)

Advanced Member

I wish I didn't have all of these balls in the air

will be trying this sex one when I can find it

I wish I didn't have all of these balls in the air

Stangnet Facilities Maint Tech... Er... Janitor

I wish I didn't have all of these balls in the air

I wish I didn't have all of these balls in the air

I wish I didn't have all of these balls in the air

Advanced Member

I wish I didn't have all of these balls in the air

Stangnet Facilities Maint Tech... Er... Janitor

I wish I didn't have all of these balls in the air

will be trying this sex one when I can find it

I wish I didn't have all of these balls in the air

I wish I didn't have all of these balls in the air

will be trying this sex one when I can find it

I wish I didn't have all of these balls in the air

Advanced Member

will be trying this sex one when I can find it

I wish I didn't have all of these balls in the air

Similar threads

Privacy & Transparency

Privacy & Transparency