Tear Down: In Search of the Elusive Rattle

spederman · Mar 11, 2006

Good luck. I tried to fix mine, I have some rattles on the front console, and somewhere in the back. I gave up. I foam taped everything, and that worked for a few weeks and now their all back and they are pissed. Louder than ever. Stupid cheapy plastic mustangs, gotta love to hate them.

Kilgore Trout · Mar 11, 2006

I am prepared to declare VICTORY over some of the rattles.

I identified one major and one possible minor cause of rattles.

I zip tied, fastened down, and trimmed off zip tie tag ends on many a wire harness. Here's one shot of that:
View attachment 484044

Also, one of the main rattles was like a soundboard. Here is the cause. The foam block in this picture was loose and rattling against the quarter trim panel making a highly anoying noise. The ironic thing is that it is there to reduce noise. I will get some Dynomat to replace it but for now it is coming out:
View attachment 484046

Now it is removed. I will clean up that adhesive when I install the Dynomat later this summer:
View attachment 484048

Cheap foam:
View attachment 484050

You can see how much nicer the replacement speaker grill and its fasteners are on this side:
View attachment 484052

Put the sound insulating blanket back in after cleaning it. It was very crooked as installed by the assembly line
View attachment 484054

Gave all the rear plastic and rubber a good coat of 303 Aerospace Protectant while I had it apart. Vacuumed all the dirt and crap from below the seats also.
View attachment 484056

Shazam! Its back together. Hardest part is reinstalling the seat back:
View attachment 484058

Time for a test drive
View attachment 484060

View attachment 484062

DropTopPony · Mar 11, 2006

helty said:
Im thinking Moser 31 splines, a full bearing and seal kit (from whoever makes the best) and Im still undecided on the differential. I hear so many contradicting things about Auburn, Eaton, Detroit and FRPP, I dont know wtf to do.

Somebody tell me what the best, strongest diffential is for a daily driven, full bolt-on + heads and cams with 4.10s GT is!

damn it

Moser 31's, Auburn Pro, FRPP bearing kit...so far so good 2 years.

Kilgore Trout · Mar 11, 2006

:OT: :OT: :OT: :OT: :OT: :OT:

:Zip2:

DropTopPony · Mar 11, 2006

When I had my new top/Carpet/Leather installed last winter the old Italian guy who did the work (a true artisan) went through and cleaned , tightened and readjusted everything. Solid as a rock...I do have one in my Dash that drives me nuts if the radio isn't on.

DropTopPony · Mar 11, 2006

Kilgore Trout said:
:OT: :OT: :OT: :OT: :OT: :OT:

:Zip2:

he asked in big red letters...had to answer

Kilgore Trout · Mar 11, 2006

droptopponynj said:
When I had my new top/Carpet/Leather installed last winter the old Italian guy who did the work (a true artisan) went through and cleaned , tightened and readjusted everything. Solid as a rock...I do have one in my Dash that drives me nuts if the radio isn't on.

Did you get a cloth top? We have a trim shop here owned by Italians. It is called Fabini's this is their website: http://www.fabini.com/

exindust · Mar 11, 2006

Howd the test drive go?

Kilgore Trout · Mar 11, 2006

It def has less rattles. I think the spare may be moving around a little. I will address that tomorrow...

At least those stupid foam blocks do not rattle any more That was so annoying...

exindust · Mar 11, 2006

The only rattles i get pissed about are the ones that are impossible to fix. the Rattles from the top under the headliner...

Kilgore Trout · Mar 11, 2006

I may take off the headliner tomorrow...

Mike97gt · Mar 11, 2006

well killy. how did your rattle ride go. keep us posted.

Kilgore Trout · Mar 11, 2006

It has less rattles. More rattle investigation tomorrow

Roger_4.6_96 · Mar 11, 2006

Perect time to put light bar in with rear panels out.

Kilgore Trout · Mar 11, 2006

That's a good point. Its all back together now but when I do some Dynomat this summer it would be cool to install a lightbar at the same time

Roger_4.6_96 · Mar 11, 2006

Yea its a breeze putting one is as long as you dont mess up cutting your rear panels . Right now im getting ready to put a whole new top and frame in my car.

jasonh_86 · Mar 11, 2006

I like your car Killy.. I've never really seen pics of it til now

SteedaQ400 · Mar 12, 2006

Awesome pics kilgore. Now i kind of know how to fix my problems. I have always wanted to know how it looked without the rear seat. Thanks bud

Kilgore Trout · Mar 12, 2006

Jason: Thanks!

Steeda!400: No problem

DerekStangGT · Mar 12, 2006

jasonh_86 said:
I like your car Killy.. I've never really seen pics of it til now

thats cuz its stock and he doesnt like to show it off

Tear Down: In Search of the Elusive Rattle

Should I post up some tech pics?

Tech pics I wanna see in there :nice:

No tech pics those areas are boring :notnice:

You'll shoot yer eye out :owned:

Member

Fried or Broiled ?

Noob Slayer

Fried or Broiled ?

Noob Slayer

Noob Slayer

Fried or Broiled ?

New Member

Fried or Broiled ?

New Member

Fried or Broiled ?

it doe snot

Fried or Broiled ?

Fried or Broiled ?

I

New Member

Fried or Broiled ?

My package is in the mail!

Similar threads

Privacy & Transparency

Privacy & Transparency