hey guys and gals can you tell me if this engine is something worth picking up? I have an 88 gt with mass air conversion and explorer intake and heads waiting to get put on. I just had a lot of work done to the heads at a shop but they are sitting on the shelf at the moment. the guy wants 750$ for this motor
302 ROLLER MOTOR
BLOCK HAS BEEN BORED 030 OVER
HEADS WERE SHAVED AND 3 ANGLE VALVE JOB
MANLY HEAVY DUTY VALVES REPLACED STOCK ONES
COMP CAM ROLLER LIFTERS
FORD RACING E303 CAM
FORD RACING 1.6 RATIO ROLLER ROCKERS
FORD RACING DOUBLE ROLLER TIMING CHAIN SET
CLEVITE BEARING WERE USED FOR EVERTYHING
ARP MAIN,ROD AND HEAD BOLTS
MAC EQUAL LENGTH SHORTY HEADERS
MELLING HI VOLUME OIL PUMP
THIS IS A LONG BLOCK SET UP
AROUND 15,000 MILES ON MOTOR, IT WAS A FUEL INJECTORED HAD IT IN A 92 F150
USING STOCK MANIFOLD AND INJECTORS.MACHINE WORK WAS DONE BY SCHILPERS SPEEDSHOP BY SULIVAN. ANY QUESTIONS EMAIL ME AT
302 ROLLER MOTOR
BLOCK HAS BEEN BORED 030 OVER
HEADS WERE SHAVED AND 3 ANGLE VALVE JOB
MANLY HEAVY DUTY VALVES REPLACED STOCK ONES
COMP CAM ROLLER LIFTERS
FORD RACING E303 CAM
FORD RACING 1.6 RATIO ROLLER ROCKERS
FORD RACING DOUBLE ROLLER TIMING CHAIN SET
CLEVITE BEARING WERE USED FOR EVERTYHING
ARP MAIN,ROD AND HEAD BOLTS
MAC EQUAL LENGTH SHORTY HEADERS
MELLING HI VOLUME OIL PUMP
THIS IS A LONG BLOCK SET UP
AROUND 15,000 MILES ON MOTOR, IT WAS A FUEL INJECTORED HAD IT IN A 92 F150
USING STOCK MANIFOLD AND INJECTORS.MACHINE WORK WAS DONE BY SCHILPERS SPEEDSHOP BY SULIVAN. ANY QUESTIONS EMAIL ME AT