That time of year again!

iLkYsPoNy · Feb 14, 2008

Well folks, it's tax refund season again!!!

I'm kinda stuck on making my decision for a little upgrade. So here goes, another "what's the best bang for the buck" thread!

I'm considering...
1) Electric Cooling Fan
2) Control Arms
3) CAI (will prolly get either way, my hacked up stock setup isn't suitable for the 90mm MAF)
4) FILL IN THE BLANK

So, what do ya'll recommend? Obviously, you can tell my i'm trying to stay in the >$300 range. My setup can be found in my sig, if you can read it. If not, let me know and I'll type it out.

allballsmustang · Feb 14, 2008

do you have gears yet? that would be a good one...

ttop88 · Feb 14, 2008

Aluminum driveshaft and a taurus fan. If you are lookin for power. Control arms will make a big differance in driving tho. A prothane kit would make a night and day differance as well.

iLkYsPoNy · Feb 14, 2008

Yes I do have gears... 3.73 to be exact.

I was trying to remember the fan swap vehicle... I'm not really a big fan of doing things that way though. I think I'd be more content going with something like a Flex-a-lite that was designed for my car.

The control arms are a must! Man, I have the worst traction at the track. Even with a fresh set of BFG drag radials I will spin and hop and so on. I need something that will help me plant the power to the ground.

Aluminum driveshaft will probably come sooner or later, we still got the $600 from the gov't that'll go into the Mustang fund.

Prothane kit???

ttop88 · Feb 14, 2008

http://store.summitracing.com/partd...&N=700+4294908331+4294908282+115&autoview=sku
http://store.summitracing.com/partd...&N=700+4294908331+4294908282+115&autoview=sku
http://store.summitracing.com/partd...&N=700+4294908331+4294908282+115&autoview=sku

iLkYsPoNy · Feb 14, 2008

For $330 ... do you think I'd notice that big of a difference?

ttop88 · Feb 14, 2008

The rubber bushings on your car are 16 years old! Yup, you will notice.

iLkYsPoNy · Feb 14, 2008

Well here's the thing, it's mostly stuff that's recently been replaced or I plan on replacing. I just replaced the sway bar links and tie rod ends. I wonder if I can just buy the front control arm bushings, strut bushings, and steering rack bushings??

PS: Would I have to remove the control arm in the front to do the bushings? What about the other stuff???

fivespeedsteed · Feb 14, 2008

damn id love to have all those new bushings. i would be able to tell it.

ryan218 · Feb 14, 2008

were putting a new roof on the house, then my dad wants to re do the kitchen....( only room in our house that hasn't had a full remodel )

dans89lx · Feb 14, 2008

subframes are cheap and i noticed a huge difference when i welded mine in...also a shifter maybe?

Flavadave4 · Feb 14, 2008

E-fan and controller would be a nice upgrade.

Mustang5L5 · Feb 14, 2008

My tax refund this year is going to paying off all my bills.

But i'm buying this with my work Bonus which i should be receiving in a few weeks

Clicky click

Oh and i also have that $600 from the gov't coming. I don't even want it. This is NOT free money. It's an ADVANCE on your 2009 tax return. That means next year, you would have $600 LESS on your refund since you are getting it now.

I was going to go spend it....but now that i read the fine print..i'm saving it.

ryan218 · Feb 14, 2008

are you serious? a 2k paint ball gun? wow spend half that and just get a nice used one and spend the rest on getting your 5.0 up to snuf to drive for a change.

Mustang5L5 · Feb 14, 2008

Well, i could be a little more conservative and get this one. Same gun minus the extras

'08 Eclipse Ego

iLkYsPoNy · Feb 15, 2008

Ahhh yes... I do need a shifter. I think I may go with the shifter and control arms. I should be able to get both for under $400 I would think. What brand of control arms are good for the price? I dont want to spend MM price on it either.

The shifter will most likely be a Pro 5.0

That time of year again!

iLkYsPoNy

if she's a tranny then... well I'd do her.... it..

allballsmustang

Member

ttop88

Member

iLkYsPoNy

if she's a tranny then... well I'd do her.... it..

ttop88

Member

iLkYsPoNy

if she's a tranny then... well I'd do her.... it..

ttop88

Member

iLkYsPoNy

if she's a tranny then... well I'd do her.... it..

fivespeedsteed

ryan218

In just 10 years, I'll be old enough to drive!!!!

dans89lx

New Member

Flavadave4

Active Member

Mustang5L5

That is…until I whipped out my Bissell

ryan218

In just 10 years, I'll be old enough to drive!!!!

Mustang5L5

That is…until I whipped out my Bissell

iLkYsPoNy

if she's a tranny then... well I'd do her.... it..

Similar threads

That time of year again!

if she's a tranny then... well I'd do her.... it..

Member

Member

if she's a tranny then... well I'd do her.... it..

Member

if she's a tranny then... well I'd do her.... it..

Member

if she's a tranny then... well I'd do her.... it..

In just 10 years, I'll be old enough to drive!!!!

New Member

Active Member

That is…until I whipped out my Bissell

In just 10 years, I'll be old enough to drive!!!!

That is…until I whipped out my Bissell

if she's a tranny then... well I'd do her.... it..

Similar threads

Privacy & Transparency

Privacy & Transparency