• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Progress Thread Therapy Car-- Freshening Up the Lower Intake

  • Thread starter Thread starter Olivethefet
  • Start date Start date Jan 17, 2019
Prev
  • 1
  • …
  • 7
  • 8
  • 9
  • 10
  • 11
  • …
  • 55
Next
First Prev 9 of 55 Next Last

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
Mar 19, 2019
#161
  • Mar 19, 2019
  • #161
I've found the same...which is why I just bought the equipment to do my own alignments.
 
Reactions: General karthief

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Mar 19, 2019
#162
  • Mar 19, 2019
  • #162
I'm committed now. I went ahead and bought the MM kit from LMR. It would cost me that much to get it done anyway. Now I get a tool I can use later.
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Mar 20, 2019
#163
  • Mar 20, 2019
  • #163
My car is lowered on Steeda sport springs. I have Steeda CC plates and bump steer kit. I run ~3.5* of caster and ~1.4* of camber. I set the bump steer kit up by matching the angle of the control arms to the angle of the tie rods vs. the stock measurements. I know that's not the 100% proper way to do it, but my car drives great. It has almost no bump steer or tram railing. Those 2 parts made a huge difference on how the car drives vs. just being lowered with a alignment.
 

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Mar 20, 2019
#164
  • Mar 20, 2019
  • #164
CC plates came in today!

 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,956
10,600
203
polk county florida
Mar 20, 2019
#165
  • Mar 20, 2019
  • #165
Damn, they mailed them to the wring address again!
 
Reactions: Mustang5L5

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Mar 22, 2019
#166
  • Mar 22, 2019
  • #166
 
Reactions: 95BlueStallion, HotFox, General karthief and 1 other person

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Mar 25, 2019
#167
  • Mar 25, 2019
  • #167
Started installing the Maximum CC plates tonight. I bought a set of Monroe struts off of Rock Auto to replace the old units that came on the car. They were inexpensive. Anyway, they fit fine but not with the CC plates. This is what the factory CC plate looks like with Monroe strut.


When I put the MM plate on this is what i ended up with.

I tried thaking a spacer out but it was still to short. Has anyone else had this problem? What front struts would you guys suggest?

This is a pic of the bump stop.
 

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Mar 25, 2019
#168
  • Mar 25, 2019
  • #168
Didn't hit "post reply" last night.

Called MM today. Super nice guys by the way! They said I wasn't the first person to run into this issue using Monroe struts. They suggest KYB as a decent strut for my application. I really dont want to spend $500 on struts right now.

I ordered two KYB 734013 AXG manually adjustable struts from Rock Auto.

If anyone needs a set of new Monroe struts to replace there worn out stock front end setup let me know. I got a deal on the ones I have and will probably never need them. I also have new urethane strut bushings that I won't be using now.
 
Reactions: Mustang5L5

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Mar 28, 2019
#169
  • Mar 28, 2019
  • #169
Got behind this on my way into work.

 

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,956
2,937
153
Long Island, NY
Mar 28, 2019
#170
  • Mar 28, 2019
  • #170
Olivethefet said:
Got behind this on my way into work.

Click to expand...

Interesting taillights. Not my style, but it’s something different.
 

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Mar 31, 2019
#171
  • Mar 31, 2019
  • #171
Bought a set of KYB AGX struts for the front of the car. I hope they are OK. Rock Auto had them on sale, but I've seen some post where it looks like some people dont like them.

They seem to be cut down to where they let the car sit lower. I'm also installing the camber plates. Does this look right?


I'm thinking about moving the .5 inch bushing from the top of the camber plate to the bottom of the plate. I need to get the other side on along with wheels so I can drop the car and see how it sits.
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Mar 31, 2019
#172
  • Mar 31, 2019
  • #172
I always put the 1/2 spacer on the bottom...looks neater to me. The technical thing is to compensate for suspension drop at the strut mount. As the suspension goes down that rod goes further into the strut....so technically....the spacer would go on the top. With stiffer lowering springs I doubt you'll ever reach the internal limits of the strut. I never have and neither have my customers. I always put the spacer on the bottom to avoid hood clearance issues and the look of that nut sitting on top the spacer.
 

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Mar 31, 2019
#173
  • Mar 31, 2019
  • #173
Thanks! That's what I was thinking. I'll swap it around tonight.
 

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Mar 31, 2019
#174
  • Mar 31, 2019
  • #174
Looks better.

 
Reactions: 90sickfox and Rdub6

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Apr 1, 2019
#175
  • Apr 1, 2019
  • #175
Best pic yet.



Both CC plates are in. Most importantly they are installed correctly. In the last pic the plat was upside down!

Got the wife in the garage to pump the brakes. It's almost to the point it can be driven. Front end will have to be all lined up but at least I can get it from the rental to the new house without a tow truck.
 
Reactions: Rdub6 and 90sickfox

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Apr 2, 2019
#176
  • Apr 2, 2019
  • #176
One step closer!

 
Reactions: 95BlueStallion, 90sickfox and Rdub6

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Apr 5, 2019
#177
  • Apr 5, 2019
  • #177
Being able to do with your car whatever you want is at the heart of the automotive community IMHO. But, do you ever see something on the road or around town that makes stop and ask yourself what the hell is that person thinking? What is the goal? I've been seeing this thing around town. It's truly unique. I'm pretty sure it has the 2JZ in it, but why did they do this?

 

stanglx2002

CT Material here
15 Year Member
Jul 7, 2005
1,563
1,110
164
Apr 5, 2019
#178
  • Apr 5, 2019
  • #178
Rollover protection
 

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,126
3,091
214
Cedar Rapids, Iowa
Apr 5, 2019
#179
  • Apr 5, 2019
  • #179
Future plans include sticking it on a K5 Chevy Blazer frame with a 350 and 4wd....
 
K

kendawg73

Well-Known Member
Feb 5, 2014
474
102
64
Apr 5, 2019
#180
  • Apr 5, 2019
  • #180
They just got a welder, and wanted to learn and had a bunch of pipe laying around???
 
Prev
  • 1
  • …
  • 7
  • 8
  • 9
  • 10
  • 11
  • …
  • 55
Next
First Prev 9 of 55 Next Last
You must log in or register to reply here.

Similar threads

M
Misfire
  • Mike3
  • May 30, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
94
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 30, 2026
Mike3
M
Progress Thread 91GTstroked 90 7 up convertible build
  • 91GTstroked
  • Apr 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
334
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 22, 2026
91GTstroked
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
844
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
K
86 GT Water Pump
  • Kade5114
  • May 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
104
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026
nickyb
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
963
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?