• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Thermostat Temp

  • Thread starter Thread starter JD1964
  • Start date Start date Feb 7, 2017
  • 1
  • 2
Next
1 of 2 Next Last

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Feb 7, 2017
#1
  • Feb 7, 2017
  • #1
I have a 180 in there now. I'm thinking about putting the factory 192 back in. My radiator is huge and even if my fans are not running, just going down the road at cruise cools the engine to below what is maximum efficiency.

I can set my fans higher and it will maintain a higher temp if I'm not moving. But as soon as I move down the road, the temps drops to the point that the 180 closes.

So, who concurs with my idea of putting the 192 back in?
 
Reactions: General karthief

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,134
10,752
213
polk county florida
Feb 7, 2017
#2
  • Feb 7, 2017
  • #2
I do
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,376
18,123
224
Massachusetts
Feb 7, 2017
#3
  • Feb 7, 2017
  • #3
I would.

My 180tstat runs at 188* consistently. Low enough I just leave it in. Gets up to 195 in a WOT blast but quickly cools down
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Feb 7, 2017
#4
  • Feb 7, 2017
  • #4
What's wrong with the stock 192* anyway?
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,134
10,752
213
polk county florida
Feb 7, 2017
#5
  • Feb 7, 2017
  • #5
Nothing, thats what they need. The colder stat comes from the 60's, the thought was cooler engine temp more hp. It has followed the uninformed crowds like an old wives tale.
 
D

Dan25nout

New Member
Feb 7, 2017
3
0
1
Feb 7, 2017
#6
  • Feb 7, 2017
  • #6
hmmm wow I would of thought the same...my car runs in the 185-90 range..is it recommended to know put a 165 thermostat in? they do sell them all over lmr an other sites...
 
D

Dan25nout

New Member
Feb 7, 2017
3
0
1
Feb 7, 2017
#7
  • Feb 7, 2017
  • #7
not (typo)
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,134
10,752
213
polk county florida
Feb 7, 2017
#8
  • Feb 7, 2017
  • #8
Engine temps are sensor related, factory calls for 195 so emissions stuff can function correctly with sensor imput to computer, thats the short version.
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Feb 7, 2017
#9
  • Feb 7, 2017
  • #9
From what I heard, the computer needs to see 188 degrees before it will go into closed loop. Please correct me if I'm wrong on this. Here goes.....;

Closed loop is when the computer accepts signal from the o2 sensors and allows the relevant adjustments to happen as you continue to drive the car.

Open loop is when the computer is running on a pre-determined fixed set of adjustments.

As designed, cold engine would run in open loop on the default settings. When the temp sensor gets to 188, it tells the computer to switch over to closed loop and passes responsibility off to the o2 sensors to direct things.

Am I correct so far? I will continue if I get concurrence
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Feb 7, 2017
#10
  • Feb 7, 2017
  • #10
Dan25nout said:
hmmm wow I would of thought the same...my car runs in the 185-90 range..is it recommended to know put a 165 thermostat in? they do sell them all over lmr an other sites...
Click to expand...

On a street driven computer controlled EFI 5.0? Hell no!! 165....NOT!

On a carbed track car that gets jet changes every time the wind blows, sure
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,134
10,752
213
polk county florida
Feb 7, 2017
#11
  • Feb 7, 2017
  • #11
John Dirks Jr said:
On a street driven computer controlled EFI 5.0? Hell no!! 165....NOT!

On a carbed track car that gets jet changes every time the wind blows, sure
Click to expand...
The wind has to change direction before you need to address jet changes, everybody knows that.
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,501
8,763
234
S.I.NY
Feb 7, 2017
#12
  • Feb 7, 2017
  • #12
I run a 180 in my blower car . In the cooler months it deff runs a little cooler then it should. Summer time it's right where I want it .
 

FourEyed

Active Member
Jan 9, 2011
93
44
39
Feb 8, 2017
#13
  • Feb 8, 2017
  • #13
I run a motorcraft 180°, Mishimoto three core radiator, a fourseasons fan-clutch, with an Autometer mechanical gauge. No issues .
 
D

Dan25nout

New Member
Feb 7, 2017
3
0
1
Feb 8, 2017
#14
  • Feb 8, 2017
  • #14
John Dirks Jr said:
From what I heard, the computer needs to see 188 degrees before it will go into closed loop. Please correct me if I'm wrong on this. Here goes.....;

Closed loop is when the computer accepts signal from the o2 sensors and allows the relevant adjustments to happen as you continue to drive the car.

Open loop is when the computer is running on a pre-determined fixed set of adjustments.

As designed, cold engine would run in open loop on the default settings. When the temp sensor gets to 188, it tells the computer to switch over to closed loop and passes responsibility off to the o2 sensors to direct things.

Am I correct so far? I will continue if I get concurrence
Click to expand...
very well put....makes complete sense thanks
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Feb 8, 2017
#15
  • Feb 8, 2017
  • #15
I have had a 180 in my car for many years, next time I flush the system I am going to put a Stock 192 back in again.
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Feb 9, 2017
#16
  • Feb 9, 2017
  • #16
Obviously many of us take out the factory 192 and put in a 180. What exactly do we gain by doing this? And how does it affect a stock setup as compared to a modified setup.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,376
18,123
224
Massachusetts
Feb 9, 2017
#17
  • Feb 9, 2017
  • #17
John Dirks Jr said:
Obviously many of us take out the factory 192 and put in a 180. What exactly do we gain by doing this? And how does it affect a stock setup as compared to a modified setup.
Click to expand...

I did it when I was a 18 year old who didn't know much and the internet told me putting in a 160 or 180 would keep the motor cooler and add HP. It's also the same internet that told me to loop my EGR coolant hoses together, and set my TPS to 0.9999999999999v

These days, given what I know about how an EFI engine works, I'd leave the stock 192 in. In fact, next time I have my intake off, I will replace it with a 192 unit.


OPEN/CLOSED loop depends on more than just temp. It also looks at other factors. I've found some info suggesting the changeover could occur as low as 140-150 degrees, so even with a 160 stat you could still go into closed loop

http://www.veryuseful.com/mustang/tech/engine/EECIVInnerWorkings/

Downside to running cold in an EFI engine is that it could potentially damage the engine. Really need to get up into the 190-200 degree range to be the most efficient.
 
Reactions: Shakerhood

FourEyed

Active Member
Jan 9, 2011
93
44
39
Feb 9, 2017
#18
  • Feb 9, 2017
  • #18
The thing is, at least for me, that when seating in traffic with the AC set on high, on a hot 100* plus Texas day my car wasn't exactly running cool with the 192* stat.

I know all about the open/closed loop deal. But with my current setup it has never ran better.

I think it's all about what works best for you.
 
Last edited: Feb 9, 2017

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Feb 10, 2017
#19
  • Feb 10, 2017
  • #19
The "thing" is, as it has already been said, The electrical sensors are calibrated to work at a higher temp for a reason. Simply put, the metal parts of the engine need that temp range to maintain their expansion rate. Pistons expand in the cylinder as the metal "grows" however many ten thousandths to seal in the cylinder pressures more efficiently. Run it cooler than that,..you get increased emissions, and potentially less than optimal drivability as a result. Additionally, a colder piston actually contributes to additional wear, as it moves in the cylinder more.

I realize it's not relevant here, but as an exaggerated example,..the 3.3L inline 6 banger that alot of these cars come with have a water pump where the impeller backs up to the #1 piston. Because the cooler water from the radiator is coming into the pump, that piston NEVER gets as hot as the other 5. Consequently, the #1 cylinder in all of Fords inline 6's is generally worn the hell out come rebuild time. In my engines case,..#1 was .030 larger than the other 5.

In the V-8's case,..that could potentially mean the 1 and 5 run cooler as well.

So then the take away here is to run the engine where the engineers wanted it to run. When you add mods that cause the engine to run hot/hotter, the cure is not a cooler T stat,...It's a better cooling system.
 
Last edited: Feb 10, 2017
Reactions: JD1964, General karthief and Mustang5L5

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Feb 10, 2017
#20
  • Feb 10, 2017
  • #20
I'm convinced. I'm going back to 192.
 
Reactions: Shakerhood
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
197
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Resolved Got Too Hot!!!
  • PonyGTrider
  • Apr 27, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
768
Fox 5.0 Mustang Tech May 6, 2025
PonyGTrider
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
695
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?