thinking about changing mid pipes

Night Shifter · May 21, 2010

i love the sound of my pro chamber but i think its a bit quiet for my tasting and i think its killing the sound of my cams..i can almost barely hear the lope and i figure thats due to the air having to go through the chambers then through mufflers.. i could be wron but it makes sense in my head..

what do you all think of pypes o/r h pipes? I used to have a mac o/r h and LOVED the way it sounded but i can get a pypes o/r h for $60. ive just never hear anything other than pypes x pipes.. not a big fan of any x either

i know i should go on youtube but would you guys go with mac or pypes..you think there will be any difference in sound?

fiveoho · May 21, 2010

mac and pypes are very closely related and to some extent, the same company. i got a pypes o/r x for my car and fitment was far from perfect. sorta horrible actually. the tricky part is the shouldered studs on the drivers side manifold. pypes reccommends taking the factory studs out and replacing them with specific studs ( cant remem the part # ). its a PITA. i still have a tick after doing all this ( i also used the adapter piece pypes reccommends which is included in the kit ). i can say that their customer service is better than average but i still have a leak

not sure about their H pipes but i would leary it may have the same issues as the X.

Kornnut · May 21, 2010

MAILING ADDRESS:
Pypes Performance Exhaust
2705 Clemens Road
Building 105A
Hatfield, PA 19440

MAC Products, Inc.
43214 Blackdeer Loop
Temecula, Ca. 92590-3473 U.S.A.

They are not the same company.

I don't really see how a H pipe can sound different. With an X pipe they can play with the position of the X and also the type of X thats in it. With an H pipe its just a cross over in the mid pipe. I haven't seen any with different positions either. Towards the back of the pipe.

Night Shifter · May 21, 2010

i didnt think there would be a major difference in the sound of an h...ive just never heard a pypes h before..the ones i found on youtube are all on 05 and up cars... kinda dont want to buy this then get stuck with it if i dont like it ya know...maybe someone on here will have a clip of one on a 96-04

damn i rally dont want any fitment issues either

Tim2002GT · May 21, 2010

My old Pypes o/r x fit pretty good. I would imagine their o/r h would fit the same.

BlackStang03 · May 21, 2010

I just have to say...for $60 can you really go wrong? I doubt their will be any sound difference in any o/r H. For $60 if you dont like it your only out $60 and I am sure you could sell it and get your money back.

Night Shifter · May 21, 2010

thats the mindset i have...guess i might pick this up tomorrow and do a comparison vid and you guys can be the judge

scupking · May 21, 2010

Seeing as you have the same cams as me I can make a few suggestions. I have a VRS Catted X with the magnaflow magnapack catback and get that nice lope at idle. What is your idle set at? I played around with the idle speeds and found I liked 850rpm the best.

Night Shifter · May 21, 2010

im at 850 as well...i truly truly dont like the sound of x's and i honestly dont like magnaflow

its just weird that i can barely hear the lope..on my build thread i have vids of what it sounded like the day after everything was put together...not sure if you heard what it sounded like

not knockng your setup scup, i actually like what your car sounds like and i know x's go very well with magnaflows but its just not my style i guess

scupking · May 21, 2010

Night Shifter said:
im at 850 as well...i truly truly dont like the sound of x's and i honestly dont like magnaflow

its just weird that i can barely hear the lope..on my build thread i have vids of what it sounded like the day after everything was put together...not sure if you heard what it sounded like

not knockng your setup scup, i actually like what your car sounds like and i know x's go very well with magnaflows but its just not my style i guess

Everyone has there own tasts of what they like. I know you are not a fan of magnaflows but here is a comparison off my car.

First video is right after the cams where installed and before the dyno tune.
http://s35.photobucket.com/albums/d154/scupking/?action=view&current=Mustangcams.flv

Second video is with Hitech stage II cams, stock headers, MRT catted H and magnapacks.
2009 :: MustangDyno.flv video by scupking - Photobucket

Third video is with Hitech stage II cams, MAC LTs, VRS catted X and magnapacks.
2009 :: Mustang293RWHP.flv video by scupking - Photobucket

BlackStang03 · May 22, 2010

damn scup that sounds real good

Night Shifter · May 22, 2010

the x definitely sounds better better scup

the lope in the 1st vid is badass...mine sounds nothing like that

thinking about changing mid pipes

Night Shifter

Well-Known Member

fiveoho

Kornnut

Night Shifter

Well-Known Member

Tim2002GT

BlackStang03

New Member

Night Shifter

Well-Known Member

scupking

Active Member

Night Shifter

Well-Known Member

scupking

Active Member

BlackStang03

New Member

Night Shifter

Well-Known Member

Similar threads

thinking about changing mid pipes

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Active Member

Well-Known Member

Active Member

New Member

Well-Known Member

Similar threads

Privacy & Transparency

Privacy & Transparency