I have 8" wide stock wheels off a 98 GT SOOOO I should be able to put 1.5" wheel spacers on them and it will be the same as having 9.5" wheels , Right? I shouldn't have any clearance problems should I. That is still under the 10.5" wheels that alot of you guys have. Talk to me, I'm about to order some from MM unless someone knows where to get some good hubcentric, high quality ones cheaper>>>
This is the way I see it.
- Thread starter cmozez
- Start date
WMDPALMER
Founding Member
MM has excellent reputation. I purchased some spacers from Pacifica Performance but I think 1" was a wide as they go. Good luck!
donjohn
New Member
i don't know if i'd say it would look stupid. The most i'd go would be 1" but there is a thread with pics about the sizing question and 1.5 was a little big for me but it worked. Spacers make the wheels flush on our cars.
EDIT: Actually i meant 1.25 was a little far for some people. 1.5 might be a little too wide. Check this thread out http://forums.stangnet.com/showthread.php?t=464444&highlight=spacers
EDIT: Actually i meant 1.25 was a little far for some people. 1.5 might be a little too wide. Check this thread out http://forums.stangnet.com/showthread.php?t=464444&highlight=spacers
Rootus
Officially Addicted
It'll be fine. A 1.5" spacer should put the edge out about where an 11" rim would have it. I've run 18x11's on my '95, and they fit fine. I've also run 25mm spacers before with no problems at all.
Dave
Dave
I ran 1" MM spacers with 98 Cobra, an 8" wheel....that 1" will put them right in line with the fronts...Some dude gave me some 1 3/4"...they looked like a Dukes of Hazard set-up....NAH...that wont work...
Stick with the 1" in my opinion....heres a look/see on the 1"
Stick with the 1" in my opinion....heres a look/see on the 1"
donjohn
New Member
Similar threads
