• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

those with Vortechs, please come in!!

  • Thread starter Thread starter DerekStangGT
  • Start date Start date Aug 31, 2005
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Aug 31, 2005
#1
  • Aug 31, 2005
  • #1
i have a few questions. theres a guy selling a used "kit" here in town and he said everything is included except the FMU. what exactly is included in the kit? also, i know this has been covered a hundred times, but can i just slap a s/c kit on an otherwise stock car, get a safe tune, and be ok? i tried a search for this, but couldnt find anything. thanks for the help, mods in sig
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Aug 31, 2005
#2
  • Aug 31, 2005
  • #2
For your car http://www.vortechsuperchargers.com/products/yourcar/00-04mustang_gt.html

Teh list http://www.vortechsuperchargers.com/products/yourcar/00-04mustang_gt.html
 

01BlkGT

Founding Member
Jan 22, 2002
1,015
0
36
ATX
Aug 31, 2005
#3
  • Aug 31, 2005
  • #3
The FMU is for the older set-up. Who's selling the kit and what's the price. Keep in mind you'll need to get a good tune and possible other supporting mods...
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Aug 31, 2005
#4
  • Aug 31, 2005
  • #4
don't forget you'll need a new mounting bracket for the head unit, unless of course it's for the same year(s) of stang
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Aug 31, 2005
#5
  • Aug 31, 2005
  • #5
01BlkGT said:
The FMU is for the older set-up. Who's selling the kit and what's the price. Keep in mind you'll need to get a good tune and possible other supporting mods...
Click to expand...
some guy with a mach 1 is selling it. he said he bought it used, then decided he didnt want to try to make it work on a 4v. he wants $800. i know i'll need a good tune also, where did you get yours? ive heard CCS is the best, but they charge ~$650 for a tune what other supporting mods might i need? fuel pump? the kit is supposed to come w/ injectors, i just hope he has them. i asked him what was included and he said "everything but the FMU, head unit, bracket, everything". it sounded a little shady, but i'll go check it out. he also has the 10# pulley on it

stangman said:
don't forget you'll need a new mounting bracket for the head unit, unless of course it's for the same year(s) of stang
Click to expand...
he said it would fit all 2000-2004 2v GTs w/ PI heads
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Aug 31, 2005
#6
  • Aug 31, 2005
  • #6
01BlkGT said:
The FMU is for the older set-up.
Click to expand...
yeah, i was reading about the FMU and it said it was to be installed downstream of the stock FPR, but the 99+ GTs dont have FPRs. what all do i need to be included in the kit?
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Aug 31, 2005
#7
  • Aug 31, 2005
  • #7
CRAP lol. Well Derek just buy it and make it work lol. For $800 I shure as heck would.(im holdin out for the KB ) Worst case you will need a fuel pump, injectors, and may need to tap into your oil pan. Ofcourse you will need a tune too. Um i would also buy a 8PSI pully if its not intercooled. 10PSI is going to make alot of heat and PERSONALLY I would lower the boost a tad. However there are people that run 10#s W/O an IC. But if you stay shy of 400 then it will last a while, granted your not beating on it. Look for around 330RWHP on Jims dyno.
 
M

mac1009

Founding Member
Feb 17, 2001
187
0
0
Atlanta, GA
Aug 31, 2005
#8
  • Aug 31, 2005
  • #8
For starters, you're going to want the blower, bracket, piping, oil feed, oil drain, and pulley. I honestly think this guy bought a kit off a '96-98 car and realized it'd be too much to make it work.

If it does fit your car, you'll need the following:
Injectors, fuel pump, Maf(optional but definitely recommended), chip/flasher w/ tune.

As far as paying $650 for a tune, it's worth it if they're good.
 

jivepepper

Founding Member
Jun 19, 2002
776
5
18
Under a Sombrero. in WV.
Aug 31, 2005
#9
  • Aug 31, 2005
  • #9
Fuel pump svt focus will do.
Maf, Lightning is a good choice.
Larger fuel injectors at least 36lbers I prefer 42lbs.
The Sc head unit
The Sc mounting bracket for your car.
The Sc inlet pipe
The Sc discharge pipe
By pass valve
Oil send lines and fittings to sc.
Oil return lines and fittings from sc
New tune via a chip are programmer.
Then I would suggest a dyno tune.
If you read the directions on Vortech's website it will give a good idea of what is needed
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Aug 31, 2005
#10
  • Aug 31, 2005
  • #10
jivepepper said:
Fuel pump svt focus will do.
Maf, Lightning is a good choice.
Larger fuel injectors at least 36lbers I prefer 42lbs.
The Sc head unit
The Sc mounting bracket for your car.
The Sc inlet pipe
The Sc discharge pipe
By pass valve
Oil send lines and fittings to sc.
Oil return lines and fittings from sc
New tune via a chip are programmer.
Then I would suggest a dyno tune.
If you read the directions on Vortech's website it will give a good idea of what is needed
Click to expand...
thanks for the list, this is exactly what i was looking for.
instead of getting a dyno tune, could i safely run a mail order tune? basically, i dont have a lot of money to throw around, but $800 is too good to pass up. so i need to be extremely safe, as cheaply as possible.
btw, anyone have any s/c install writeups?
 

DeadLurker

Daily Driven
Sep 7, 2001
7,702
0
0
New York
Aug 31, 2005
#11
  • Aug 31, 2005
  • #11
buyer beware....with used supercharger kits....not always a deal.

make sure you research it before you buy it
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Aug 31, 2005
#12
  • Aug 31, 2005
  • #12
for a tune, get your ass down here to san antonio

http://www.murillomotorsports.com/

if you dont know who Mike Murillo is, do a google he'll be tuning my nitrous setup.
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Aug 31, 2005
#13
  • Aug 31, 2005
  • #13
DeadLurker said:
buyer beware....with used supercharger kits....not always a deal.

make sure you research it before you buy it
Click to expand...
what risks are there in buying a used supercharger? is it a bad idea? im trying to do as much research as possible. would a kit designed for another model year be ok with my 00 if i got a different bracket? it should all be the same, right? i was reading the parts list, and it is a long list of clamps and hoses. im skeptical that he has all the pieces.
 
S

SSS281

Founding Member
Dec 27, 2001
2,236
0
46
Kutztown, PA
Sep 1, 2005
#14
  • Sep 1, 2005
  • #14
i bought a used kit that was for 99-04 [he had 3 mounting brackets included and two belts] turned out the s/c leaks oil so that needs a 330$ rebuild and the belt for 99 not included or the idler pulley. not sure if the bolts/screws are correct i havent gotten that far yet. i still have a 99 bracket from my old setup i sold last yr when the motor went south so im just going to re-use that. long story short: used kits from different model yrs are a PAIN IN THE ASS to get all pieced together. the $$ ill end up spending i couldve just bought a brand new tuner kit [bare kit just the essentials] from cool blue performance.
 
You must log in or register to reply here.

Similar threads

X
VE Table Not Dialed? Send Me Your Datalog.
  • X-cam34
  • Feb 8, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
1K
Digital Self-tuning Forum May 1, 2026
X-cam34
X
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
786
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
"Tuning" Vortech kit with FMU discs- question
  • nicholase
  • Jun 22, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
28
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 13, 2025
Noobz347
Fox 89’ GT 331 stroker, Trickflow upper/lower, TF#3 Cam, stuffed with forged goodies.
  • 08GT500
  • Nov 6, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
742
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 6, 2025
08GT500
help me understand calibrated maf sensors and injectors
  • stackz
  • Sep 21, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?