• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Throttle body help

  • Thread starter Thread starter timmy0257
  • Start date Start date Jan 14, 2006
T

timmy0257

New Member
Nov 13, 2005
5
0
0
Jan 14, 2006
#1
  • Jan 14, 2006
  • #1
I am contemplating replacing my throttle body in my 89. Will I need any additional hardware( EGR plate, gaskets, etc.) when I replace the stock 65mm with a larger 70mm TB? Currently, I only have the Cobra intake added.
 

Jozey

New Member
Nov 11, 2003
127
0
0
Tucson,AZ
Jan 14, 2006
#2
  • Jan 14, 2006
  • #2
yes you will need gaskets.you can buy the 70mm egr spacer or if you know of anyone that does machining you can bore the stock one to about 73mm or so.thats what i did and it will save you 50 bux or so
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 14, 2006
#3
  • Jan 14, 2006
  • #3
Be prepared to wrestle with the studs that hold the EGR spacer in place. They tend to corrode badly and can make remvoing the EGR spacer difficult. Home Depot, Ace Hardware or Lowes can supply replacement bolts.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jan 14, 2006
#4
  • Jan 14, 2006
  • #4
I think most new egr spacers come with gaskets?
 

troyGT03

New Member
Feb 22, 2004
278
0
0
too close to memphis,tn
Jan 14, 2006
#5
  • Jan 14, 2006
  • #5
if you order a tb and tb spacer kit the gaskets are included usually.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Jan 15, 2006
#6
  • Jan 15, 2006
  • #6
timmy0257 said:
I am contemplating replacing my throttle body in my 89. Will I need any additional hardware( EGR plate, gaskets, etc.) when I replace the stock 65mm with a larger 70mm TB? Currently, I only have the Cobra intake added.
Click to expand...

I'd stick with a 65mm if you already have one. Also, a stock one isn't 65mm.
 

poneypower89

Now everyone in the world will know I wanna bang t
Dec 6, 2004
0
3
28
Indianapolis, Indiana
Jan 15, 2006
#7
  • Jan 15, 2006
  • #7
I was under the impression the cobra intake didnt need a TB spacer..... EGR is built in
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Jan 15, 2006
#8
  • Jan 15, 2006
  • #8
poneypower89 said:
I was under the impression the cobra intake didnt need a TB spacer..... EGR is built in
Click to expand...

You are correct, sir.
 
You must log in or register to reply here.

Similar threads

Engine Vacc leak detector
  • Creomod
  • Jul 19, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
221
Fox 5.0 Mustang Tech Jul 25, 2026
Mustang5L5
Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
Engine Catch Can or not?
  • R82148V
  • Mar 4, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
497
Fox 5.0 Mustang Tech Mar 6, 2026
ctandc
C
F
Engine 1988 Foxbody idle issues
  • fernandosgarage55
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Apr 30, 2026
AeroCoupe
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?