Roush Throttle Body ????

[01Saleen-465]

I am thinking about purchasing an Accufab 75 mm TB to go along with some future mods for my car. Will this TB bolt right up to the stock Saleen series II intake elbow, or will I have to do some porting to the elbow because of the larger diameter TB? Also, are there any CAIs out there that I could use with this TB and a 90mm LMAF? I heard that the Chicane CAI only works w a 80mm MAF.

 

[Saleen Mike]

The FORD 70mm will go right on and be trouble free.

The Densecharger seems to have shown the best dyno results per Mark at PA. The Chicane CAI will work with any MAF.

 

[Acheron315]

The accufab 75mm works great on my car, and is the same size (inside diameter) as the series II inlet. I installed it with no problems, and have the chicane cold air on my car as well.

 

[gonen20]

Will a 75mm BBK or Accufab throttle Body work on the Saleen Series I Blower inlet tube???? Is there any noticeable advantages on the blown cars with this size throttle body in place of the stock one??? Anybody have dyno results???

 

[01Saleen-465]

The accufab 75mm works great on my car, and is the same size (inside diameter) as the series II inlet. I installed it with no problems, and have the chicane cold air on my car as well.

Thanks! Do you have the stock MAF meter or a larger one like the 90mm LMAF?

 

[sstrayer]

I had an accufab 75mm throttle body on my S2, along with the Chicane RIPP pipe. Definitely helps get the blower to whine louder.