Roush Throttle Body ????

01Saleen-465 · Feb 17, 2006

I am thinking about purchasing an Accufab 75 mm TB to go along with some future mods for my car. Will this TB bolt right up to the stock Saleen series II intake elbow, or will I have to do some porting to the elbow because of the larger diameter TB? Also, are there any CAIs out there that I could use with this TB and a 90mm LMAF? I heard that the Chicane CAI only works w a 80mm MAF.

Saleen Mike · Feb 17, 2006

The FORD 70mm will go right on and be trouble free.

The Densecharger seems to have shown the best dyno results per Mark at PA. The Chicane CAI will work with any MAF.

Acheron315 · Feb 18, 2006

The accufab 75mm works great on my car, and is the same size (inside diameter) as the series II inlet. I installed it with no problems, and have the chicane cold air on my car as well.

gonen20 · Feb 19, 2006

Will a 75mm BBK or Accufab throttle Body work on the Saleen Series I Blower inlet tube???? Is there any noticeable advantages on the blown cars with this size throttle body in place of the stock one??? Anybody have dyno results???

01Saleen-465 · Feb 19, 2006

Acheron315 said:
The accufab 75mm works great on my car, and is the same size (inside diameter) as the series II inlet. I installed it with no problems, and have the chicane cold air on my car as well.

Thanks! Do you have the stock MAF meter or a larger one like the 90mm LMAF?

sstrayer · Feb 19, 2006

I had an accufab 75mm throttle body on my S2, along with the Chicane RIPP pipe. Definitely helps get the blower to whine louder.

Roush Throttle Body ????

01Saleen-465

New Member

Saleen Mike

Acheron315

New Member

gonen20

New Member

01Saleen-465

New Member

sstrayer

Similar threads

Roush Throttle Body ????

01Saleen-465

New Member

Saleen Mike

Acheron315

New Member

gonen20

New Member

01Saleen-465

New Member

sstrayer

Similar threads

Privacy & Transparency

Privacy & Transparency