• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Ticking sound after washing the engine

  • Thread starter Thread starter Avenger
  • Start date Start date Mar 19, 2004

Avenger

New Member
Feb 19, 2002
1,030
0
0
QC
Mar 19, 2004
#1
  • Mar 19, 2004
  • #1
I need your help guys, this sound is driving me crazy. At first, I only heard it just after hosing down the engine. It went away after the engine warmed up. Last time I washed the engine, it didn't went away and I can't stand it anymore !! Guess it was the last time I washed my engine

I know it doesn't come from the engine itself cause removing the accessory belt cures the problem. I spun all the pulleys by hand to check for bearing wear. The water pump one was pretty rough so I bought a new water pump. The tsik tsik tsik didn't went away. I then installed some of my mother's 02 GT pulleys with no success. Unfortunately, they can't all be swapped cause there are some differences between 99 and 02.

I don't know what to think anymore ? Could it be the belt ? I really don't want to spend 60$ an hour to get it fixed at the dealership...

Thanks for any ideas !
 
L

license2ill

Member
May 7, 2003
223
0
16
Mar 19, 2004
#2
  • Mar 19, 2004
  • #2
could be a tiny crack in one of the exhaust manifolds
 

Avenger

New Member
Feb 19, 2002
1,030
0
0
QC
Mar 19, 2004
#3
  • Mar 19, 2004
  • #3
Can't be, the sound goes away if I remove the belt.
 
R

Ron Jeremy

New Member
Nov 13, 2003
747
1
0
Hollywood, California...I live next door to Jenna
Mar 20, 2004
#4
  • Mar 20, 2004
  • #4
You should have NEVER NEVER hosed down the engine. You NEVER hose down the engine or even steam clean it. Especially on a 2 and a 3 year old car. It doesn't need steam cleaning. You can damage the wiring and the engine when you steam clean it. You probably cracked something like the manifold or the block or damaged the wiring. Good luck trying to fix it. Be ready to pay big bucks to do some major repairs.
 

dkshadow

Banned
May 12, 2003
952
0
0
TEXAS
Mar 20, 2004
#5
  • Mar 20, 2004
  • #5
Ron Jeremy said:
You should have NEVER NEVER hosed down the engine. You NEVER hose down the engine or even steam clean it. Especially on a 2 and a 3 year old car. It doesn't need steam cleaning. You can damage the wiring and the engine when you steam clean it. You probably cracked something like the manifold or the block or damaged the wiring. Good luck trying to fix it. Be ready to pay big bucks to do some major repairs.
Click to expand...
 

oogtdude

Banned
Jun 9, 2002
1,626
0
0
Mar 20, 2004
#6
  • Mar 20, 2004
  • #6
Ron Jeremy said:
You should have NEVER NEVER hosed down the engine. You NEVER hose down the engine or even steam clean it. Especially on a 2 and a 3 year old car. It doesn't need steam cleaning. You can damage the wiring and the engine when you steam clean it. You probably cracked something like the manifold or the block or damaged the wiring. Good luck trying to fix it. Be ready to pay big bucks to do some major repairs.
Click to expand...




 
0

03Sleeper

New Member
Apr 29, 2003
464
0
0
Fordville,USA
Mar 20, 2004
#7
  • Mar 20, 2004
  • #7
Ron Jeremy said:
You should have NEVER NEVER hosed down the engine. You NEVER hose down the engine or even steam clean it. Especially on a 2 and a 3 year old car. It doesn't need steam cleaning. You can damage the wiring and the engine when you steam clean it. You probably cracked something like the manifold or the block or damaged the wiring. Good luck trying to fix it. Be ready to pay big bucks to do some major repairs.
Click to expand...

Ron jermey is ALWAYS OVER REACTING TO EVERYTHING!
 

mustang90

Founding Member
Feb 8, 2001
1,209
15
58
Mar 20, 2004
#8
  • Mar 20, 2004
  • #8
It could be the idler pully. Your fine if you power wash a cold motor. Under any circumstance do not power wash a hot motor for that will only crack parts and may cause major damage! I power wash my motor every 2 months or so and I have no problems.
 
You must log in or register to reply here.

Similar threads

B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
712
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
985
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
D
Engine Serpentine belt squeal after reinstall?
  • dqureshi06
  • Oct 30, 2024
  • Fox 5.0 Mustang Tech
Replies
15
Views
910
Fox 5.0 Mustang Tech Nov 1, 2024
Noobz347
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
596
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
F
Trouble Shooting Sudden Shift of AFR at low RPM
  • Farva_84
  • Jun 6, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
497
SN95 4.6L Mustang Tech Jun 8, 2025
Farva_84
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?