• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Time For T-56 kit, lightwheight flywheel, and a hydralic clutch kit Need Opinions!!!

  • Thread starter Thread starter kenika65
  • Start date Start date Oct 13, 2008
K

kenika65

New Member
Oct 13, 2008
4
0
0
TEXAS
Oct 13, 2008
#1
  • Oct 13, 2008
  • #1
This is for a 95 GTS

Okay I have finally pulled out my crapolllaaa T-5 and am looking for what lightweight flywheel to bolt on there.

Also I am interested in a hydraulic clutch kit, is there such a thing? This is my brothers car and he has a bad knee so I want to get rid of the cable and install a hydraulic slave cylinder.. hope you all can give me some advice on that.

And last but not least, the T-56!!! My plan was to buy from www.bieberfever.com
http://www.ampperformance.com/xcart/...cat=283&page=1

But now I'm wondering if I should go with the kit from D&D Performance
T-56 Kit 94-04

I don't know if I should go with the viper transmission or not are the different gear ratios that much better???

Also AMP provides a reverse lock out harness when D&D doesn't mention it???

Hope you all can give me some good info on who to buy from and what to buy. And any good info on flywheels and hydraulic clutch's would help out alot....


Thanks again!
 
K

kenika65

New Member
Oct 13, 2008
4
0
0
TEXAS
Oct 13, 2008
#2
  • Oct 13, 2008
  • #2
Any advice?
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,302
1,645
214
Acworth, GA
Oct 14, 2008
#3
  • Oct 14, 2008
  • #3
That's a tough one. I honestly don't know a whole lot about the T-56, but since no one else has anything. I'm pretty sure you're going to have to run a Cobra style bellhousing which is setup for a cable style clutch. The Camaro setup has a hydraulic clutch, but the bellhousing won't fit on a Ford. You might be able to get an adapater from Advanced Adapters to fit that bellhousing to a Ford. Mcleod sells a universal clutch master cylinder along with an adapter that will work with a side mount clutch slave cylinder (standard equipment on a 93-97 Camaro). You might be better off going to a Canon style slave cylinder (standard equipment on a 98-02 Camaro). You might be able to mount a Canon style slave cylinder from a late model Ford F-150 onto a T-56 with a Cobra Bellhousing. Either way will require some ingenuity.

Kurt
 
K

kenika65

New Member
Oct 13, 2008
4
0
0
TEXAS
Oct 14, 2008
#4
  • Oct 14, 2008
  • #4
d&d and amp both supply bellhousing to drive shaft for the t56 swap, so that is not an issue... but thank you for your info on the hydralic clutch set-up.
 
You must log in or register to reply here.

Similar threads

A
Need some info on putting a 2002 4.6l in a 1997 gt.
  • Austin4.6l
  • May 29, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
147
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2025
Austin4.6l
A
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
966
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
P
Progress Thread Weight loss 90s coupe . -500lbs
  • ponixpress
  • Mar 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
42
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 13, 2025
ponixpress
P
For Sale 91 Mustang LX 5.0 Coupe 6-speed
  • fastang67
  • Nov 30, 2023
  • Fox Body Mustangs For Sale (1979-93)
Replies
8
Views
4K
Fox Body Mustangs For Sale (1979-93) Jul 17, 2024
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?