Timing doesn't advance with spout in

L

Lawbreaker5.0

Member

Feb 20, 2009

543

2

18

Texas

Sep 3, 2010

#1

• Sep 3, 2010

• #1

I just re stabbed my distributer cuz the tfi was hitting the water neck orginally. I set the timing to 10 degrees and turned off the car and plugged the spout in. Started her back up and it read about 14 degrees? I thought the computer adds 20 degrees or so, so i should be around 30 degrees, right? Maybe i'm wrong, but thats what i remember reading.

What would cause it to only add 4 degrees?

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,216

17,899

224

Massachusetts

Sep 3, 2010

#2

• Sep 3, 2010

• #2

Did you blip the throttle and see if it advances up to 20-30??

I think it really is only about 14-18 at idle when spout is in.

 

L

Lawbreaker5.0

Member

Feb 20, 2009

543

2

18

Texas

Sep 3, 2010

#3

• Sep 3, 2010

• #3

I did not blip the throttle. That would make sense then. I swear i always hear/read "my base timing is 14 degrees and total timing is 34". So by quickly hitting the throtle it should go to a certain degree and stay there until it comes back down from idle?

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,216

17,899

224

Massachusetts

Sep 3, 2010

#4

• Sep 3, 2010

• #4

If you give it a blip, it should spike up to 20-30 or something and come down. Total timing is heavily dependant on load,rpm and other factors.

Now if you blip it and it doesn't move, then you have a prob

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Sep 4, 2010

#5

• Sep 4, 2010

• #5

Is the hot idle set really high?

It should have advanced 10* or so with installing the SPOUT connector, regardless of throttle blipping. You can easily hear the difference in the idle speed with the SPOUT connected vs not.

Are there any codes? Is the SPOUT circuit open?

 

L

Lawbreaker5.0

Member

Feb 20, 2009

543

2

18

Texas

Sep 4, 2010

#6

• Sep 4, 2010

• #6

Yeah I have the base idle pretty high. I was trying to help a rolling idle issue but now I read that setting it higher makes it worse. I'm about to work on the car and will know more in a little bit.