tires/rims....pics...i need your help

98greenmachine · Sep 4, 2004

i need help!! those of you with upgraded rims, please post pics of your tires/rims....i am wanting some really wide tires in the back, with smaller ones in the front...like the old muscle car look. in concept, i want 17x9 in the front and 18x10 in the back. however, i don't know anything about this stuff really, and i need help. i don't want them so big that the tires stick out past the fenderwell. my car is a 98 model, if it matters...so, with that in mind, how big do the back tires need to be before this will happen? the tire place near my house quoted me for 235/45/R17 and 275/35/R18. these will be nitto tires, priced at $268 ea. for the back tires. is there anywhere cheaper that i can find these tires?? please help!! thanks so much!

ChrisYellowV6 · Sep 5, 2004

www.tirerack.com - depending on where you live the shipping usually isnt too bad (they have a dozen shipping centers across the coruntry)

those rims are way too wide. wider than opra's as*. when shes fat. lol. if you put 9" wide rims on your front you are going to be rubbing up real bad...the stock on the 98 is a 17x8" front and back and I wouldn't go over 8" personally.

PonyJoe · Sep 5, 2004

Stock on a 98 is 16x8, not 17x8. 9s will not rub, a lot of people on here have them. 9s would be in the 245 width range.

GREENBIOCH · Sep 5, 2004

Carolyn how about these websites?? I like this look alot

Here is the pic of the rims:
http://www.wheelreplicas.com/bullittcars.htm

here is where you get em:
http://www.wheelreplicas.com/bullitt.htm

Rol224 · Sep 5, 2004

I'm thinking of going down to Summit and buying the 98 cobra wheels (there only 125 a pop) Cool or gay?

I'm guessing if you got those 10.5 tires are more expensive....and wear quicker? (Not being able to rotate)

98greenmachine · Sep 5, 2004

thanks guys....you've been a lot of help.

yeah, greenbioch....i am going to be getting black deep dish bullitt rims- you must have gotten my telepathic messages to have posted those pics....

97v6Silver · Sep 5, 2004

i think you should get 12's on the back our v6's are such beasts they'll rip anything else right off the road with all the torque they produce

GREENBIOCH · Sep 5, 2004

98greenmachine said:
thanks guys....you've been a lot of help.

yeah, greenbioch....i am going to be getting black deep dish bullitt rims- you must have gotten my telepathic messages to have posted those pics....

thats what I was gonna get...your copying me aren't you??

ChrisYellowV6 · Sep 5, 2004

17x8 is an option

98greenmachine · Sep 6, 2004

GREENBIOCH said:
thats what I was gonna get...your copying me aren't you??

no you're copying me!!! anyhow...they will still look good on our cars.... when are you ordering yours? mine will probably be ordered this week.

i'm going to get the 17x9/17x10.5 package i think....i have a friend w/a GT that has those sizes (i found out after i posted this) and it looks good, cuz they have 315's on the back- really wide.

GREENBIOCH · Sep 6, 2004

98greenmachine said:
no you're copying me!!! anyhow...they will still look good on our cars.... when are you ordering yours? mine will probably be ordered this week.

i'm going to get the 17x9/17x10.5 package i think....i have a friend w/a GT that has those sizes (i found out after i posted this) and it looks good, cuz they have 315's on the back- really wide.

It won't be for a while, I'm not doing much to the car till next spring cause fall/winter is coming soon. So I will probably pick up a nitrous kit next spring first, then start on the suspension/wheel thing after that.

But I still think your copying me....yeah I know a guy with the chromed ones, they look good!!

5-SpeedStallion · Sep 7, 2004

PonyJoe said:
Stock on a 98 is 16x8, not 17x8. 9s will not rub, a lot of people on here have them. 9s would be in the 245 width range.

Bullitts are 17x8 and they take ~245 width, so 9's would take ~275's. My 255's on Bullitts are just about perfect in the front but I could use a some more in the back. Also, when turning slowly at full lock, my 255's rub in the front, and my friend's '03 Cobras 17x9's with 275's stick out a tiny bit in the front. So, 17x9's, assuming they are shod with 275's as they should be, may be too wide in the front. I know there is less width room in the back of pre-99s but I'm not sure about the front. You may want to check on that.

Edit: Here's a pic of my Bullitts with 255 Yokohamas just for comparison's sake.

marvinmycat · Sep 8, 2004

In 98 on the V6, 15X8 is stock with an optional 16X8 available. I had two 98 Mustangs and those were the sizes available, as they both came with the stock rims, one with optional 16's. Just an FYI.

GREENBIOCH · Sep 8, 2004

I have the 16's on my 98, there hellacool!

Ghostalker · Sep 8, 2004

my 95' stock rims were hella not
but they do make hella good snow rims!?

98greenmachine · Sep 10, 2004

5-SpeedStallion said:
Bullitts are 17x8 and they take ~245 width, so 9's would take ~275's. My 255's on Bullitts are just about perfect in the front but I could use a some more in the back. Also, when turning slowly at full lock, my 255's rub in the front, and my friend's '03 Cobras 17x9's with 275's stick out a tiny bit in the front. So, 17x9's, assuming they are shod with 275's as they should be, may be too wide in the front. I know there is less width room in the back of pre-99s but I'm not sure about the front. You may want to check on that.

Edit: Here's a pic of my Bullitts with 255 Yokohamas just for comparison's sake.

those rims/tires look good in that pic. thanks for the info....i'll have to check on the size for pre99 stangs...somewhere....i dunno. who ever knew that this could be so complicated....lol so if i don't want rubbing in the front then i should get 17x8?

well, that leads me to another question....basically are all the sn95 models (v6, gt, and cobra) the same as far as inch for inch- like for what wheels will fit and everything??? b/c i saw in this month's issue of 5.0 that a sn95 (cobra if i remember right) and it had the 18x10 rims in the back that i originally thought about- but it gave me a good picture of what it would look like. i hope this makes sense....if anyone knows the answer....??? but it would help me to know what rims/tires COULD fit on my car, you know?

djedit · Sep 10, 2004

I just put on my Saleen 18x9 and 18x10 rims yesterday. I will have pics up shortly.

98greenmachine · Sep 10, 2004

djedit said:
I just put on my Saleen 18x9 and 18x10 rims yesterday. I will have pics up shortly.

cool- i can't wait to see.....

tires/rims....pics...i need your help

98greenmachine

Arkan-SASS

ChrisYellowV6

New Member

PonyJoe

New Member

GREENBIOCH

Rol224

New Member

98greenmachine

Arkan-SASS

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,

GREENBIOCH

ChrisYellowV6

New Member

98greenmachine

Arkan-SASS

GREENBIOCH

5-SpeedStallion

Attachments

marvinmycat

GREENBIOCH

Ghostalker

Member

98greenmachine

Arkan-SASS

djedit

98greenmachine

Arkan-SASS

Similar threads

tires/rims....pics...i need your help

Arkan-SASS

New Member

New Member

New Member

Arkan-SASS

it came to $4.56 and i got $0.44 change from a 5,

New Member

Arkan-SASS

Attachments

Member

Arkan-SASS

Arkan-SASS

Similar threads

Privacy & Transparency

Privacy & Transparency