tko-500

stang9150

Member
Dec 26, 2005
142
6
18
i just ordered a tko 500 with bellhousing and yoke.do i also need to buy the clutch fork or does the stock t-5 one fit?what do they mean by grinding the tack welds on the croosmember or they talking about the 2 ears that hang down if i do that they have to be rewelded correct?anyone have experience installing these on a fox body (91) hatch.thanks in advance
 
I got my Tremec about 8 yrs ago, before they had the trans crossmember that's specific for the tremec. I had to cut of the mount "ears" and reweld farther back. then I had to rivet patches for the former mount locations. Now they have crossmembers made for the aftermerket tranny. Fork will work.
 
You will have to break the welds on the stock crossmember and move it to the rear and reweld it. I just decided to save myself some time and buy the HPM unit. The HPM one is beefy and already offset for the tko. It cost about 100 and you don't have to worry about the tailhousing banging on the modified stock crossmember which some have an issue with.
Kevin