tmoss lower has arrived

90lxwhite · Feb 8, 2013

Tmoss lower intake arrived today but I won't be able to install until next weekend. I think I'm going to try and have a dyno pull a few weeks to a month after, hope I'm not disappointed. If the dyno shows 0-5 hp gain I'd feel jilted a little due to the money, effort, and car in pieces for weeks.

ratio411 · Feb 9, 2013

Did you have him port it for a particular head or gasket?
How much did it cost you (if you don't mind)?

Pics?????

90lxwhite · Feb 9, 2013

Charges:

Labor for porting HO lower intake you send us for E7/Gt40 heads - $160
Option: Solvent tank, R&R oil baffle(s) bead blast, coat with 500°F clear ceramic engine enamel - $25 (see attached picture)
Return insured shipping - $30 (add $5 for NY,NJ,MD, RI,FL,NV,ID,MT,WY,CO,AZ,NM add $10 for WA,OR,CA) or purchase a return shipping label from the carrier when you ship and place it in the box with the money order. USPS stamps are NOT acceptable as it has always cost me more to return ship than the amount of postage stamps sent. I did the prepaid shipping route and total paid was like $245 labor/shipping

here is a link to his site describing the work http://www.tmossporting.0catch.com/

90lxwhite · Feb 9, 2013

I almost bought a 95 cobra upper and lower (lower was ported by moss as well) for $400 but I went this route instead. Oh and this is going on a 95, not the 90

Incon · Feb 9, 2013

I run one of Tom's intakes on my stock-ish coupe. It is a fun car to drive.

90lxwhite · Feb 9, 2013

Incon said:
I run one of Tom's intakes on my stock-ish coupe. It is a fun car to drive.

cool man, I'm looking forward to getting er runnin. If you could do it over again would you have went w the moss lower or opted for something else?

RIO5.0 · Feb 9, 2013

Iv'e had Tmoss's ported intakes a few times over...you'll get a good hit for your money, and it'll wake it up.
Throwing on a ported lower isn't comparable to a set of AFR's...but everything helps....

90lxwhite · Feb 10, 2013

RIO5.0 said:
Iv'e had Tmoss's ported intakes a few times over...you'll get a good hit for your money, and it'll wake it up.
Throwing on a ported lower isn't comparable to a set of AFR's...but everything helps....

Oh I hear ya bout heads vs intakes I'm just hopin for a lil gain and no placebo

RIO5.0 · Feb 10, 2013

I had a 302 combo with Thumper E7s with a spring upgrade, Steeda 19, Tmoss worked 93 Cobra, LT's and 19 inj's and dyno'd at 302 FWHP. Stock FWHP is 220 so I'd say those type of warmed over parts work. Was a snappy motor. It's the whole combo though... I can see your point on just adding the lower.

90lxwhite · Feb 10, 2013

RIO5.0 said:
I had a 302 combo with Thumper E7s with a spring upgrade, Steeda 19, Tmoss worked 93 Cobra, LT's and 19 inj's and dyno'd at 302 FWHP. Stock FWHP is 220 so I'd say those type of warmed over parts work. Was a snappy motor. It's the whole combo though... I can see your point on just adding the lower.

yeah we'll see how it goes. I'd be happy to see a gain of 10 to the wheels or so, not holding my breath but maybe.. Car is stockish, fresh motor stock e7 upgraded springs w 3 ang valve job, .512 lift comp cam

Incon · Feb 10, 2013

90lxwhite said:
cool man, I'm looking forward to getting er runnin. If you could do it over again would you have went w the moss lower or opted for something else?

For me and my car I would not change a thing. It is a mild combo that I run with some iron GT40 heads and a cam. I wanted stock appearing, but more than power than stock.

90lxwhite · Feb 10, 2013

hear ya, wish I had better heads but I got what I got

Black Stampede · Feb 10, 2013

Just depends on your setup. If you are doing a budget build its not a bad route!

Incon · Feb 11, 2013

It is an easy topic to search here and other sites that will yield plenty of results. I'm sure someone has done the exact mods and probably has dyno or track times.

90lxwhite · Feb 11, 2013

Incon said:
It is an easy topic to search here and other sites that will yield plenty of results. I'm sure someone has done the exact mods and probably has dyno or track times.

I've researched it to death. Some say seat of pants, one guy reported no gain on dyno, some report a couple tenths quicker in the 1/4.

Way2QWK · Mar 28, 2013

90lx..... did you ever get the tmoss ported intake installed? I need to replace a leaking intake gasket and am thinking of doing this while its off.

90lxwhite · Mar 29, 2013

Way2QWK said:
90lx..... did you ever get the tmoss ported intake installed? I need to replace a leaking intake gasket and am thinking of doing this while its off.

I sure did man, put it on a 95 gt and I like it. She seems to be a little less "asthmatic" and pulls harder than before. The other day I had some subframe connectors put on and then I changed the oil and took er for a run. She shot up to 120 mph pretty quick.

Gearbanger 101 · Mar 29, 2013

Curious....but why did you stay with the stock intake? An Explorer intake can be had dirt cheap now a days and you could have sent that out to TMOSS for porting and probably made 20hp+ instead of the single digit gains you probably actually made? Not trying to be antagonistic, just wanting to understand your logic regarding this?

Porting the stock intake was the ticket when that was pretty much your only option outside a new expensive aftermarket unit, but the Explorer units have opened up a whole new avenue of cheap used intake and will make a lot more power for the money? Not to mention there are plenty of used aftermarket intakes out there years later that can be had now for what you paid for the labour and shipping on this one? I got my near mint Trick Flow Track Heat for all of $80 more than you paid for your modified stocker last summer at a local flea market. Came with sensors, coolant tube and everything?

90lxwhite · Mar 29, 2013

I haven't found many "dirt cheap" explorer intakes out there anymore. Then add another $90 to $100 for the elbow adapter. So I'd have like $400 or more wrapped up into a used "gt40" by the time mr moss ported it and sent it back and it's always a gamble buying used, I could've ordered one and it ended up being cracked or something

http://www.ebay.com/sch/i.html?_odkw=explorer intake&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR11.TRC1&_nkw=gt40 intake&_sacat=0

tmoss lower has arrived

90lxwhite

I'm kind of a She-Man

ratio411

90lxwhite

I'm kind of a She-Man

Attachments

90lxwhite

I'm kind of a She-Man

Incon

Member

90lxwhite

I'm kind of a She-Man

RIO5.0

90lxwhite

I'm kind of a She-Man

RIO5.0

90lxwhite

I'm kind of a She-Man

Incon

Member

90lxwhite

I'm kind of a She-Man

Black Stampede

Incon

Member

90lxwhite

I'm kind of a She-Man

Way2QWK

Member

90lxwhite

I'm kind of a She-Man

Gearbanger 101

Straight Outta Locash

90lxwhite

I'm kind of a She-Man

Similar threads

tmoss lower has arrived

I'm kind of a She-Man

I'm kind of a She-Man

Attachments

I'm kind of a She-Man

Member

I'm kind of a She-Man

I'm kind of a She-Man

I'm kind of a She-Man

Member

I'm kind of a She-Man

Member

I'm kind of a She-Man

Member

I'm kind of a She-Man

Straight Outta Locash

I'm kind of a She-Man

Similar threads

Privacy & Transparency

Privacy & Transparency