• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tps setting from .75 to .96ish

  • Thread starter Thread starter 5.0TailPipeHump
  • Start date Start date Mar 29, 2007

5.0TailPipeHump

Member
Dec 5, 2006
153
0
17
Mar 29, 2007
#1
  • Mar 29, 2007
  • #1
I got around to setting up my tps , it was at .75 then i went ahead and got it to around .96 and the computer finally learn its new setting , now when accelerating the rps hit hard then i take off 1 or 2 seconds after that. so basicly in 2nd gear im hitting around 4000 rps then it takes off 1 or 2 seconds after. now before that everything was hunkydory, any suggestions on what to do , im no expert when setting the tps but it seemed pretty easy and i used a pretty old unit when setting it , im gonna try to set it to where it was before and see if that solves the problem if it does not then im thinking either the clutch is slipping or somthing way outta my reach. Any suggestions of what else to do would be great as i miss the pull when i get on the gas pedal right away.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 29, 2007
#2
  • Mar 29, 2007
  • #2
Dump the codes and see what the computer says is wrong…Codes may be present in the computer even if the Check Engine light isn’t on.

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.



See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is less than $30 or so at AutoZone or Wal-Mart.

Or for a nicer scanner see http://www.midwayautosupply.com/p-7208-equus-digital-ford-code-reader-3145.aspx– It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $30.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Mar 29, 2007
#3
  • Mar 29, 2007
  • #3
Pull your codes...
the tps should not be able to cause the problems you are describing.

jason
 

5.0TailPipeHump

Member
Dec 5, 2006
153
0
17
Mar 29, 2007
#4
  • Mar 29, 2007
  • #4
I think its my clutch cable, i might try to attempt it myself or take it in to a transmison shop . grrr
 
You must log in or register to reply here.

Similar threads

J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
347
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
343
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
323
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
221
Fox 5.0 Mustang Tech Tuesday at 10:26 PM
AeroCoupe
G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
758
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?