• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tranny is apart...

  • Thread starter Thread starter bentley429
  • Start date Start date Mar 15, 2006
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Mar 15, 2006
#1
  • Mar 15, 2006
  • #1
Well a buddy of mine is rebuilding my tremec 3550 and he took it apart today....and its junk. Forth gear clutch cone, synchro collar, third gear assy, second gear, synchro collar/ reverse, and first gear are ALL shot. Thats just the big stuff too. Does anyone know some places I can get these parts from? I was really hoping it was just some synchros....
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Mar 15, 2006
#2
  • Mar 15, 2006
  • #2
anyone???
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 15, 2006
#3
  • Mar 15, 2006
  • #3
See http://www.ttcautomotive.com/English/onlineorder/product.asp to download a FREE service manual for T5 or Tremec 3550
You will need the Adobe Acrobat viewer which is also a free download – http://www.adobe.com/products/acrobat/readstep2.html

See http://www.hanlonmotorsports.com/ or http://www.ddperformance.com for parts

A T5 rebuild kit with syncros, bearings and other small parts costs about $160. It does not include any gears or shafts.

http://cartapes.com also has a video on how to rebuild your T5 or Tremec. It costs less than $20, and is worth every penny of it.

I did a Tremec 3550 rebuild, and it wasn't that difficult. The video was an immense help, and I would recommend viewing it. At $20, it will give you an opportunity to look and decide for yourself if you think that it is something you want to try to do.

You will also need a magnetic base and dial indicator to measure the endplay ($20-$40). http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=1306&PMCTLG=00

The tricky part is that you will need some shims to adjust the endplay in the two shafts: the new bearings will change the clearance. There is no way of telling what it will be until you get to the point that it is time to measure and check the clearances. Halon has the individual shims if you can wait for them. If you can't afford the wait, the auto parts store can sell you some shim stock and you can make your own, or have a machine shop make them for you. The shim stock comes in brass (easy to cut) and steel, in varying thicknesses. That's where the dial indicator & base come in - there is no way to get the clearance right without it.

Getting the car jacked up high enough to get the trans jack in and out from under the car was somewhat challenging. Since I didn't have a helper, getting the trans out of the car and back it was one of the more difficult things about the job. I built a trans jack out of 2x6's, some angle iron and a $25 floor jack. If I hadn't done that, I would have needed a helper or to rent a commercial trans jack. At 100+ pounds the Tremec 3550 was far too heavy for me to lift by myself.
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Mar 16, 2006
#4
  • Mar 16, 2006
  • #4
Did some shopping around, $806.12 is the cheapest I found for all the parts. I hate this pos car.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Mar 16, 2006
#5
  • Mar 16, 2006
  • #5
Sell it then.
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
330
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
19
Views
996
1996 - 2004 SN95 Mustang -General/Talk- Monday at 10:08 AM
squeak93
L
Shift Fork Issue?
  • LegionOfZoom
  • Jun 6, 2023
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
3
Views
2K
2015 - 2023 (S550) Mustang -General/Talk Jun 6, 2023
90sickfox
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
750
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?