tranny swap q's?

[zx3focus]

I am purchasing a t3650 to replace the t45 in my '97 cobra. The guy I am getting it off of says the flywheel is a universal pattern and out of a 01 cobra. Do we have the same crank pattern? First he said it was 6 bolt then he said universal. Are they the same thing?? Also Do the 2 trannys mount the same. am I forgetting anything I will need to complete the swap. Or is it pretty much plug and play? Oh yeah it also come with a wiring harness.

 

[Dope 97GT]

I am purchasing a t3650 to replace the t45 in my '97 cobra. The guy I am getting it off of says the flywheel is a universal pattern and out of a 01 cobra. Do we have the same crank pattern? First he said it was 6 bolt then he said universal. Are they the same thing?? Also Do the 2 trannys mount the same. am I forgetting anything I will need to complete the swap. Or is it pretty much plug and play? Oh yeah it also come with a wiring harness.

i think you may need the transmission crossmember but im not sure.

 

[zx3focus]

well the tranny also comes with the lower mount. I dont know if that will help me any?

 

[zx3focus]

Does my car and a '01 have the same crank bolt pattern?

 

[zx3focus]

anybody know if my car has a 6 or 8 bolt flywheel? And Is it 10.5 or 11"?

 

[zx3focus]

do my mounts have to be modified to fit the 3650??

 

[zx3focus]

anybody know if I can get a kit or something to run the speedo for this tranny?

 

[zx3focus]

anyone?

 

[BennyBlown2v]

TTT What is needed for this swap in terms of getting it to fit? What about speedo/tach etc???????????

 

[zx3focus]

nobodies ever done this swap or what??

 

[zx3focus]

Can somone help me out a little. I am doing the swap in a week or so and I need what I might run into. Also need to know if the mouts are going to need to be modified. And how do I run the tach and/speedo. THANKS

 

[four six]

I did that swap in my 98 GT. You can use you 10.5" clutch and your 10.5" flywheel for the swap(I did) it will work, or you can up grade to 11". Also you'll need a dallas mustang speed cal Extended range for the speedo. Do not plug in your speed sensor without it. If I remember correctly everything mounted up ok. Oh you need a drive shaft yoke frome a 2002-2004 GT. I think thats it. Good luck bud

 

[Mustang5L5]

I beleive a '97 CObra already has an 11" clutch. You might be able to keep your flywheel and reuse your clutch if it has the same number splines as the 3650. Unsure if it does though.

 

[four six]

Have you done anything so far?

 

[zx3focus]

no I am still waiting for the trans.