• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Transmission wont stay in first

  • Thread starter Thread starter Jeffrostang
  • Start date Start date Nov 9, 2005

Jeffrostang

Founding Member
Jan 4, 2001
335
0
16
Richmond, VA
Nov 9, 2005
#1
  • Nov 9, 2005
  • #1
I just bought a 95 mustang cobra and the transmission will not stay in first gear. As soon as I get on the gas I get a big clunk and it pops right out. No other gear does it and it does have a short thow shifter on it. Otherwise I love the car and it runs like a champ. Any ideas?
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Nov 9, 2005
#2
  • Nov 9, 2005
  • #2
Someone else had this problem recently, I'm curious what the resolution was. Mine did it around 5-6 years ago with a $100 junkyard trans I put in it after annihilating my stocker, but I don't remember what the issue was. I believe it was something with a bad bearing causing excessive clearance? Does it grind any gears at all? Could possibly be from worn synchros causing the gears to wear on the edges of the teeth.
 

Joes95GT

New Member
Jan 23, 2003
3,132
1
0
Delaware
Nov 9, 2005
#3
  • Nov 9, 2005
  • #3
StangGT1995 said:
Someone else had this problem recently, I'm curious what the resolution was. Mine did it around 5-6 years ago with a $100 junkyard trans I put in it after annihilating my stocker, but I don't remember what the issue was. I believe it was something with a bad bearing causing excessive clearance? Does it grind any gears at all? Could possibly be from worn synchros causing the gears to wear on the edges of the teeth.
Click to expand...
I've never understood first gear in T5's. I know they aren't synchronized.

Blocker rings are what holds the car in gear....that would be my first guess...

Joe
 

18mustangs

New Member
Jun 8, 2005
533
1
0
Virginia Beach, VA
Nov 9, 2005
#4
  • Nov 9, 2005
  • #4
Jeffrostang said:
I just bought a 95 mustang cobra and the transmission will not stay in first gear. As soon as I get on the gas I get a big clunk and it pops right out. No other gear does it and it does have a short thow shifter on it. Otherwise I love the car and it runs like a champ. Any ideas?
Click to expand...

Before you start anything expensive, check the stops on your short throw shifter. I had a similar problem a few years ago and it turned out that my adjustable stop moved.
TIm
 

Methodical

15 Year Member
Dec 1, 2003
1,192
11
59
Clinton, MD
Nov 9, 2005
#5
  • Nov 9, 2005
  • #5
Yeah pull the leather boot and adjust the stops. Go for a drive and keep adjusting 'til it stays. The shifter is just probably and the very end where it jumps out of gear. When I install my BM ripper I had the same problem - trying to get it as close as possible before it jumps out of gear. Let us know the outcome. Peace.
 

Jeffrostang

Founding Member
Jan 4, 2001
335
0
16
Richmond, VA
Nov 9, 2005
#6
  • Nov 9, 2005
  • #6
I'll try and adjust the stops tommorrow. Thanks for the info. 1st is the only gear that does it and the rest of the trans is smooth and clean shifting. Its gotta be the shifter. It does it almost everytime. I start in second to avoid the embarassment of the load pop it makes when it flys out of gear.
 
D

DARK-5.0

Founding Member
Feb 20, 2002
724
1
19
Leawood, KS
Nov 10, 2005
#7
  • Nov 10, 2005
  • #7
Like said above, check your shifter stops, If that doesn't cure the problem. Worst case senario is that your shift interlock is worn out. When the interlocks go bad, it will pop out of gear. No problem though, the interlockers are right under the shifter base.

Jeremy
 
G

Green 94 5.0

Founding Member
Mar 25, 2002
2,601
12
79
Ft. Lauderdale, FL
Nov 10, 2005
#8
  • Nov 10, 2005
  • #8
if it was the front stop on the shifter, it should give him trouble in 3rd and 5th as well. my guess would be something internal with the tranny.
 

will_95gt

Member
Jul 27, 2004
298
1
16
Austin, TX
Nov 10, 2005
#9
  • Nov 10, 2005
  • #9
I have the exact same problem in 2nd. Not sure exactly what part is malfunctioning but it scares the hell out of my passengers whenever it happens. (which is probably 3 or 4 times a week)
 

18mustangs

New Member
Jun 8, 2005
533
1
0
Virginia Beach, VA
Nov 10, 2005
#10
  • Nov 10, 2005
  • #10
Green 94 5.0 said:
if it was the front stop on the shifter, it should give him trouble in 3rd and 5th as well. my guess would be something internal with the tranny.
Click to expand...

Perhaps, but the above point about checking the shifter stops was to exhaust the free possibilities before trying the expensive stuff. That being said when my shifter stop caused my tranny to pop out of 1st, 3rd and 5th were fine. After my stops were adjusted the problem ceased.
Tim
 
D

DARK-5.0

Founding Member
Feb 20, 2002
724
1
19
Leawood, KS
Nov 10, 2005
#11
  • Nov 10, 2005
  • #11
Sorry about my above comment about the interlocks, the interlocks stop you from engaging two gears at once. What you want to do is pop off your shifter and look at the detents on the shift forks. They will wollow out over time and will cause the gear to pop out. So check that out. Again, its an easy fix.

Jeremy
 

Jeffrostang

Founding Member
Jan 4, 2001
335
0
16
Richmond, VA
Nov 11, 2005
#12
  • Nov 11, 2005
  • #12
I adjusted the stops on the shifter and it is still bad. Whats weird is if the trans is warmed up it does it alot less, when cold it won't stay in period. Today I also noticed that 3rd gear is making a whining sound that gets worse thoughout the gear. Haven't used 5th much yet. But 2nd, 4th, and reverse work great. I think I need a rebuild or upgrade.
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Nov 11, 2005
#13
  • Nov 11, 2005
  • #13
this happens to me when i downship to 2nd, and i've got the stock shifter.

a buddy of mine's pops out of reverse, and once we adjusted the bump-stop, it took care of it. might wanna try that.
 

Jeffrostang

Founding Member
Jan 4, 2001
335
0
16
Richmond, VA
Nov 13, 2005
#14
  • Nov 13, 2005
  • #14
Looks like I'm going to take it to www.bieberfever.com in phoenix and let them replace the trans. I debating the t-5 or the TKO 500. I wonder what the difference in install work would be.
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Nov 13, 2005
#15
  • Nov 13, 2005
  • #15
t-56
 
I

igotyofire

Member
Feb 26, 2004
774
1
19
Southern California
Nov 14, 2005
#16
  • Nov 14, 2005
  • #16
3rd gear whine is common i belive, i belive it is the loudest gear...lol i usually tell people i have a supercharger when i shift into 3rd haha. ya but theyre are some ways to quiet it down if it becomes too annoying
 
You must log in or register to reply here.

Similar threads

Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
302
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
216
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
H
Transmission Help
  • Harman78
  • Feb 20, 2025
  • SN95 V6 Mustang Tech
Replies
2
Views
275
SN95 V6 Mustang Tech Feb 21, 2025
Harman78
H
P
Is it normal for all of this to go wrong or did I get played when I bought this ONLY A MONTH AGO.
  • ponygal02
  • Nov 14, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
272
1996 - 2004 SN95 Mustang -General/Talk- Nov 14, 2025
Noobz347
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
726
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?