Trickflow combo, will it work?

[JMD Engineering]

Well- i dont have enough money for a whole TrickFlow Street heat, so im planning on piecing the kit together over time.

This is what I'm planning on getting, but i wanted to get some advice on whether id have problems (with the intake/TB/Maf/injector combo):

- Street heat intake (upper/lower)
- 24#
- 73mm C&L MAF (calibrated for 24#)
- 70mm TB (too small? what brand?)
- MAC 5.0 CAI
- (if necessary?) EGR Spacer

Anyone see any problems with that combo? Im running a B303, Flowmasters, O/R BBK Xpipe, STOCK Headers (will get BBK's if money permits after), removed air silencer (heh). And finally- after it all, how much will i be putting out ?

 

[Philstang]

what heads?

 

[DMAN302]

Leave out the CAI and put the money towards something that will actually make some power. Get the heads first and the MAF and injectors after...you should go with a pump upgrade now though. Use the money you saved from the above to do the exhaust. With above items less the heads the B cam will hurt more than help..you looking at 210 maybe at the wheels, injectors and TB won't help untill there needed..and there not needed without the increased flow from the heads.