• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Tsbs After Warranty Expired?

  • Thread starter Thread starter hillie16
  • Start date Start date Aug 22, 2012

hillie16

Founding Member
Nov 29, 1999
6,003
9
108
Aug 22, 2012
#1
  • Aug 22, 2012
  • #1
Does Ford still perform TSB repairs after the warranty is out? I have he rattling inspection cover on the bellhousing. I tried to fix it with some foam tape between the cover and bell housing, which bowed the top in and it started scraping against the flywheel. On top of the fact that it still rattles some.....
 

SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
Long Island NY
Aug 23, 2012
#2
  • Aug 23, 2012
  • #2
No, TSB's are only covered under warranty. Sounds like the you're having an issue with the separator plate, if you still have drivetrain warranty it might be covered.
 

hillie16

Founding Member
Nov 29, 1999
6,003
9
108
Aug 24, 2012
#3
  • Aug 24, 2012
  • #3
Damn...looks like I'm gonna have to drop the tranny myself. Warranty was out shortly after I bought the car and didn't have the problem then. Guess that's a drawback to having a low mileage car.
 

SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
Long Island NY
Aug 24, 2012
#4
  • Aug 24, 2012
  • #4
I hear ya, same thing happened to me, my drivetrain warranty expire June 30th of this year and it started giving me trouble end of July the kick in the ass is the has 31,000 miles.
 

hillie16

Founding Member
Nov 29, 1999
6,003
9
108
Aug 25, 2012
#5
  • Aug 25, 2012
  • #5
Yup, I just turned over 21,000. FordCustSrvc Is there a price available for the new plate described in the TSB, and is it a part that can be ordered?


TSB
09-18-16
  • 4.6L MANUAL TRANSMISSION - SEPARATOR PLATE BUZZ - BUILT BEFORE 4/5/2009
Publication Date: September 9, 2009

FORD: 2005-2010 Mustang
This article supersedes TSB 8-2-10 to update the production fix date, vehicle model years and part list.
ISSUE:

Some 2005-2010 Mustang vehicles built before 4/5/2009 and equipped with a 4.6L engine and manual transmission, may exhibit an oil-canning or exhaust rattle/buzz around 2000 - 2500 RPM during the first few minutes of driving after a cold start. The sound goes away after the car warms up. The concern may be caused by the separator plate, between the rear face of the engine block and the transmission housing, vibrating and/or contacting the flywheel.
ACTION:

Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE


  1. Remove transmission per Workshop Manual (WSM), Section 308-03B.
  2. Pry separator plate from the rear face of the block alignment dowels and slide it out from between block and flywheel. Replace with new service part.
  3. Install transmission per WSM, Section 308-03B.

    NOTE: INSTALL NEW SEPARATOR PLATE TO TRANSMISSION BOLTS IF MISSING OR DAMAGED. (FIGURE 1)



    Figure 1 - Article 09-18-16

PART NUMBERPART NAME
8R3Z-7007-B Separator Plate
W500231-S439 Bolt
WARRANTY STATUS:

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATIONDESCRIPTIONTIME
091816A 2005-2010 Mustang: Replace The Separator Plate, Includes Time To Remove And Install Transmission (Do Not Use With Any Other Labor Operations) 2.8 Hrs.
DEALER CODING

BASIC PART NO.CONDITION CODE
6A373 07
 

SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
Long Island NY
Aug 25, 2012
#6
  • Aug 25, 2012
  • #6
The part number is right in the TSB

PART NUMBERPART NAME
8R3Z-7007-B Separator Plate
W500231-S439 Bolt

You can order these at any dealer.
 
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?