alright guys here is what im building. i have a late 60's model mexican 302 block stroked to a 331. with all probe forged internals, deep dish 20cc pistons, which should make my compression around 8.2-1, an e303 cam, gt-40 port and polished heads with upgraded vaulves, rockers, and springs, ported upper and lower intakes, 42lb injectors and 42lb maf. stock throttle body, and a turbonetics 67mm turbo. everyone keeps telling me im probably going to split my block. what is the safest way to go with this set up without buying a different block. i only plan to run the car to a 6k redline. and i keep seeing these turbo set ups on stock 302's runnin about 10-12lbs of boost. would my car hold up to around the same boost settings or what because i dont want to get my project going a split my block.