twin turbo or single turbo

[66Camaro454]

They fit just fine, the 15g is not much larger than the 13. With the 15g up front theres still prob 3/4 of an inch between it and the radiator.

And i also never said anything about putting those turbos on a mustang just simply showing that you can run a larger, smaller turbo setup....

well this is a mustang forum, and in fact the only way ur larger smaller turbo theory would b effective if they were both in like some sort of y pipe goin to the intercooler seperating the turbos cuz 1 behind another would b really ineffective seeing that they are diffrent sizes, working at difrent rpms and difrent psi/vac,i can duck tape 5 turbos to a gokart doesnt mean they make it go faster.

 

[USAlx50]

2 tbos

"Why not go twin and get two diferent size turbos? The small one for low end torque and a bigger one for top end. I have a couple friends who have these types of set-ups in their cars( integra and talon) but man they fly!"


how and why would you put 2 turbos on a 4 banger???

 

[gaslight]

i can duck tape 5 turbos to a gokart doesnt mean they make it go faster.

that was funny.
Give up on the idea of 2 different sized turbos. They would be working against one another. They would have different efficiency RPMs and surge limits.
You don't have to go 'Big' on a single setup. You want a properly sized turbo for your setup. I have a 66mm and my friend has a 60mm. Both cars fly on the street. We just put the turbo kits on this spring and haven't been to the track yet or dyno. So I don't have any numbers for you.
Twins are nice but it seems more Bling Bling to me. It should also be cheaper with a single and lets face it turbo kits are expensive.

 

[TwinTurbo93]

Why not go twin and get two diferent size turbos? The small one for low end torque and a bigger one for top end.

Thats the way turbo supras come stock, its called sequential turbocharging. Its not a good idea for your mustang though. All the big hp supras you see are all single turbos, the smaller turbo seems to turn into a liability.

A single kit should perform just as well as twins, its just a matter of personal prefrence. I like twins because of their larger efficency range, I can run low boost with no surge on the street yet they flow enough to support 1000hp.

 

[TwinTurbo93]

Twins are nice but it seems more Bling Bling to me.

Now this is bling
http://www.lateral-g.net/sandlin/

 

[66Camaro454]

Now this is bling
http://www.lateral-g.net/sandlin/

HOLY quad turbo batman

 

[NotQuik]

Where at in orlando are you twinturbo93?

 

[TwinTurbo93]

East Orlando, not far from UCF

and that link is an LS1 with 8 turbos

 

[Qwk88LX]

Twin-mutha-humpin'-Turbo

OK guys look, it goes like this.....


Get a nice supercharger for the low end, and one huge ass turbo for the top end. Don't ask me how it works because i have no clue, but i know some foreign companies like Renault and Peugeot have been doing it for years to fill the RPM range better.


Just imagine....supercharger gear whine up to about 3500rpm, then whistle of the turbo after that to about 8500rpm, then that blow off valve hissing durring the shifts....

I wanna see that..scratch that... I wanna drive one of those..

 

[66Camaro454]

which is the best twin turbo kit for a 5ho?

 

[TwinTurbo93]

http://vecco.net

 

[85_SS_302_Coupe]

Damn, that 8x turbo '57 sounds like a damn space ship!! That's so damn rocknroll it's not even funny.

 

[slow_93_stang]

twinturbo93 what kinda car do you have that is twin turbo....cause im also in the central florida area.....i was also wondering what kit you have on there i was thinking of going home built twin turbo system just wanted your personal oppionion

 

[TwinTurbo93]

Hey man, chances are you have probably seen the car somwhere around here, lol. Go to Veccos website, the silver 93 GT is mine, Rob S. I have a Vecco stage 3 kit on the car right now, with 57 trim T3/T04E's and stage 3 wheels. I use to have an Incon kit before, but I perfer the Veccos.

A DIY turbo kit would not be that hard either... and way cheaper. We just got done with a single T60-1 hifi on a friends car that was "homemade" and it mph's in the 1/4 just as high as my friends car with a $4000+ HP kit. Its all up to you, the major deciding factors are gonna be $$ (of course) and availability of someone who can do it for you, or having the skills and tools to do it yourself. Feel free to contact me anytime and you can either check out some turbo fox's in person (single, twin, DIY and kit) since your so close or I'll help you any other way I can. Good Luck!!
Rob

 

[slow_93_stang]

that would be cool to come see some of your turbo cars..... the only thing is that im going to be going carbed with this turbo setup.....im not really sure if there is anything that i would be needing to do differently or what not...but i thought that i could buy a vortech carb cap for there superchargers and incorperate that into the twin turbo setup....

i would appreciate any advice that you could give me.....also what did you not like about the incon tt kit.....i have heard good things...just wondering

thanks

brad

 

[TwinTurbo93]

Carbed will be exactly the same setup just with a carb hat. I loved the Incons, and I never once had any problem with them. They were on the car when it was totally stock and the thing flew, I decided to go with the Vecco kit when I rebuilt the motor and I like it because I can do all the work on it I need to myself. I installed the kit myself in 2 days. With the Incons I took the car to Lamotta to have done, and they made things a little to crowded IMHO, changing the plugs wasn't too fun. Another thing is that the customer service is great compared to trying to find parts for a kit that is pretty rare. But the Incons were an awsome kit, I actually bought another incon kit I'm either going to part with or find some other use for. This one however is my old incon kits daddy, the 1000tti.

 

[slow_93_stang]

you were saying that you had a incon kit....hmmm maybe you might want to sell it.....also i noticed you were a fuel....whens the next time you will be out at the corner.....i have a buddy that you might know that goes out there...he has a green lt1 camaro (head and cam car) did an auto swap..but let me know the next time you will be out there i would love to come out and look at your car or take a ride in it....just let me know

thanks

brad

 

[aete2]

twin all the way!

 

[66Camaro454]

been doin allot of research vecco stages are the best twin kit out, incon is better but they are out of buisness ...vecco is purtier though

 

[85_SS_302_Coupe]

All those high dollar setups definately are sweet, but power can be made MUCH cheaper if you're crafty.

http://www.toohighpsi.com/BudgetTT/BudgetTT.htm