twisted wedge people

M

murphmaster5

New Member

Oct 2, 2005

115

0

0

PA

Jan 17, 2006

#1

• Jan 17, 2006

• #1

i wanted to get the afr 165 but the twisted wedge are cheaper but my question im worried about the piston valve clearence the afr's are 1.90 intake and the twisted wedge are 2.02 will i be okay with clearence and should i be looking for heads with 1.90 is 2.02 to much for my setup please help buying heads next week thanx

 

M

murphmaster5

New Member

Oct 2, 2005

115

0

0

PA

Jan 17, 2006

#2

• Jan 17, 2006

• #2

ohhh yea ill be running an e cam is that cool with 2.02 on the tw also ive herd bad thing about the spring on the afr but how about the tw springs

 

sweet88gt

Member

Jun 25, 2005

334

0

16

Venice FL

Jan 17, 2006

#3

• Jan 17, 2006

• #3

I had the same concern but went ahead a bought a set anyway. I run an e303 similar cam with stock pistons. I also run 1.6 roller rockers to keep it ok. I would always suggest to check with clay bar. Easier to check the wreck your new high dollar investment.

 

F

FullAuto

Founding Member

Aug 29, 2002

157

0

16

Midwest City, Ok

Jan 17, 2006

#4

• Jan 17, 2006

• #4

It will work. TW will fit a stock shortblock. Your E cam won't be a concern.

 

Bad92GT

The 5 Minute Plan Man

Jun 10, 2004

492

0

0

SC

Jan 17, 2006

#5

• Jan 17, 2006

• #5

the valves are pushed up into the heads so it allows for room

 

R

rflow50

New Member

Jun 18, 2005

172

0

0

TX

Jan 17, 2006

#6

• Jan 17, 2006

• #6

that the same setup i was running before i went with a 347 except for the intake, I was running a TFS street intake, an no problems, best time in the 1/4 was a 12.5. You should be doing O.K.

 

S

Sicarius428

Active Member

Jan 6, 2004

2,085

5

49

Jan 18, 2006

#7

• Jan 18, 2006

• #7

I have a similar setup. You can run the stage 1 cam and be fine too which is what I suggest.
Kevin

 

LB0193

Member

Dec 6, 2005

171

0

16

IL

Jan 18, 2006

#8

• Jan 18, 2006

• #8

I also suggest the stage 1 cam and the tfs heads awsome set up far better then AFR

 

mustangramair

Member

Feb 24, 2004

326

0

17

Iowa

Jan 18, 2006

#9

• Jan 18, 2006

• #9

I run the twisted wedges with the TFS stage 1 cam on stock pistons and it works, i can't say for sure without knowing what pistons you are running.

 

M

MatthewP

Founding Member

Dec 7, 2001

355

0

0

Calgary, Alberta

Jan 19, 2006

#10

• Jan 19, 2006

• #10

I ran the TFS Track Heat heads with a TFS stage 2 cam on a stock 90 short block. With the cam installed straight up, it worked fine. That's a really nice combination if you ask me.

-Matthew