twisted wedges and timing N/A combo?

[frcefedlx]

What is a good base timing setting for the trick flow top end kit. I am now running N/A until I get blower rebuilt or upgraded and with forced induction ran it at 10 deg. would advancing it give a little more performance or am I better of leaving it where its at? When I had no real mods I beleive my timing with stock heads was somewhere around 13-14 degs and it seemed to like that.

 

[Grn92LX]

18* is usually the sweet spot with twisted wedges. Thats what mine liked when I ran the stock eec and no PMS.

 

[vikingpower]

18* is usually the sweet spot with twisted wedges. Thats what mine liked when I ran the stock eec and no PMS.

What is the "PMS"? Also what plug did you run if you can remember... I'm at .050 and 18*

 

[Grn92LX]

Its a tuning device that anderson motorsport sells.

I run autolite 3924's gapped appx .050". I have my timing tuned so its 34* total from 4000 and up.