typhoon intake

[oxfordgt]

I found this on ebay today. I past it up because I have heard more bad then good about these. I have only heard of one guy installing this intake has anyone else and if so any better results.

http://cgi.ebay.com/ebaymotors/TYPH...hZ019QQitemZ8075532535QQrdZ1QQsspagenameZWD1V

 

[DropTopPony]

i think they all will be on ebay eventually...what a POS

I did hear that HPS was getting ready to dyno theirs....but we heard that before too.

 

[y2k02]

I will be posting about the pos in a few weeks running 20psi.

 

[DropTopPony]

I will be posting about the pos in a few weeks running 20psi.

i hope it works for you....A guy on modular fords tried it on his blown GT and gained nothing at all...i think he was in the 12-14 psi area.

 

[y2k02]

Yes, I read that one. He still had stock internals. He didn't swap his pullies and didn't rev past 6500rpm. Not a good example of what it will do> you should check out this thread.
http://www.modularpowerhouse.com/forums/showthread.php?p=459888#post459888

 

[DropTopPony]

Yes, I read that one. He still had stock internals. He didn't swap his pullies and didn't rev past 6500rpm. Not a good example of what it will do> you should check out this thread.
http://www.modularpowerhouse.com/forums/showthread.php?p=459888#post459888

she has it but no before or after numbers with it...for all we know it could be costing her power.

I look forward to see what it will do on yours.

 

[helty]

Thought I'd share this. If this isnt enough to convince some of you that this thing is a POS, then I have a used turbonator I'd like to sell you, $500 firm.

http://www.modularpowerhouse.com/forums/showthread.php?t=36640

*no, I dont really have a turbonator*

 

[stangGT97]

Thought I'd share this. If this isnt enough to convince some of you that this thing is a POS, then I have a used turbonator I'd like to sell you, $500 firm.

wow, what complete garbage. the other person in that thread was saying she had to grind her intake to get it to fit snug... talk about lack of quality control

 

[DropTopPony]

Thought I'd share this. If this isnt enough to convince some of you that this thing is a POS, then I have a used turbonator I'd like to sell you, $500 firm.

http://www.modularpowerhouse.com/forums/showthread.php?t=36640

*no, I dont really have a turbonator*

Wow thats even worse then the guy gaining 0hp....so far Stangnet is the only forum to be anti this intake! Every other forum i post on people are still sticking up for this POS! I guess we are the only ones who know Chinese Castings don't meet US standards and never will.

 

[jeffnoel]

Any idea how many parts on your Mustang aren't made in the good ol US of A?

 

[DropTopPony]

Any idea how many parts on your Mustang aren't made in the good ol US of A?

i'm willing to bet that 0% are metal cast in China!

 

[jeffnoel]

Your right there probably made in Mexico or Korea were QC is much better.

 

[geaux]

There is a thread on modularpowerhouse.com where they installed one and had to weld it because it had a crack and leak. No word on if it made power but not really a QC indorsement is it?

 

[DropTopPony]

Your right there probably made in Mexico or Korea were QC is much better.

I'll take a Mexican made product supervised by Americans over a Chinese made product supervised by Chinese any day. Fords Mexican plants are manned by Mexican workers but are run by Americans and still meet the quality just at lower non union inflated pay rates. Chinese plants are staffed and ran by Chinese who don't give a rats ass about quality and have no need to put in the correct QC measurements because they don't adhere to US manufacturing standards which in regards to metal are very high.

 

[Dusstbuster]

There is a thread on modularpowerhouse.com where they installed one and had to weld it because it had a crack and leak. No word on if it made power but not really a QC indorsement is it?

Welcome to 6 posts before yours lol