Some of you may be following my thread here and others may not, I'll fill in all the holes for those of you that have not seen any of my posts before. My car is a relatively new build and is sporting a complete UPR Pro Series Suspension setup. It has made well over 1,500rwhp on the dyno and has recently made a few passes at the track. On our first outing to the track we found out just how well the UPR Pro Series suspension works!
Needless to say these are some tough parts! The car went up and back down and the only damage was some banged up headers. The fully chromoly front suspension was unscathed. It was now time to install the UPR Oil Pan Savers!!!
In about 15 minutes we were able to install these Oil Pan Savers to the bottom of the K member and I'll no longer worry about smashed parts if/when the car goes on the bumper again. These chromoly ski's sport the same powder coat finish that the K member sports and look right at home on the car.
Needless to say these are some tough parts! The car went up and back down and the only damage was some banged up headers. The fully chromoly front suspension was unscathed. It was now time to install the UPR Oil Pan Savers!!!
In about 15 minutes we were able to install these Oil Pan Savers to the bottom of the K member and I'll no longer worry about smashed parts if/when the car goes on the bumper again. These chromoly ski's sport the same powder coat finish that the K member sports and look right at home on the car.