UPR shifter installation

curtg21

New Member

May 4, 2004

12

0

0

sarasota,fl

Jun 22, 2004

#1

• Jun 22, 2004

• #1

Just purchased a UPR bluethunder shifter and I’m having problems. After installation it is hard to fully select gears and reverse does not work, period. Anybody have experience with these shifters? I tried adjusting the bolts that limit the shifters travel, but still doesn’t work right. Any information will help. Thanks.

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Jun 22, 2004

#2

• Jun 22, 2004

• #2

Well I've used a few of their shifters with no issues, installed about 6 of them. Still sounds like a stop bolt issue to me, if they are not properly adjusted it will not work. To rule those out put the bolts all the way in so the shifter doesn't hit it at all.

Reverse most of the time has issues in a T-5, trying putting the shifter in 4th then bring it back, most have to let the clutch out a hair to get a T5 to go ito reverse.

 

19stang87

New Member

Apr 29, 2003

134

0

0

WoodStock,GA

Jun 22, 2004

#3

• Jun 22, 2004

• #3

not to steal this from ya but how are those UPR shifters i want to get one soon....

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Jun 22, 2004

#4

• Jun 22, 2004

• #4

19stang87 said:

not to steal this from ya but how are those UPR shifters i want to get one soon....

Click to expand...

Pretty nice, they are basically a Steeda Tri-AX with a little more spring tension for 3rd gear shifts...nice piece but I still favor a Pro 5.0

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jun 22, 2004

#5

• Jun 22, 2004

• #5

did you make sure it is the right shifter for your application? (like you did not get one for a tremec, etc).....?
did you swap the plastic bushing deal on the bottom of the lever. i dont know if that could make a difference (im sure it doesnt, cuz Mr Whiz, the Rickster, did not say anything.
just trying to think of something for ya.
and yeah, to echo other's thoughts, i would back the stops out all the way for now, till you get it to work (no rammin gears till it is solved anyhow).

good luck.

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Jun 22, 2004

#6

• Jun 22, 2004

• #6

Hissin50, just for future info... the T-5, Tremec 3550 and TKO have different bolt patterns, so if it bolted up correctly it should be the correct one.

The plastic cup he is referring to is in the tranny stock, it is where the ball from the shifter rides.

Thanks for the props

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jun 22, 2004

#7

• Jun 22, 2004

• #7

Rick, i figured all the different trannies had to have different bolt patterns and bosses (from reading catalog applications, and i figured what were the odds that they could all fit interchangably. LOL).

but i recall a thread about 6 months back in one of the forums, where someone had gotten the wrong shifter (i think he had gotten it from classifieds or an auction), and could not get it to work right on his T5, but i think it was fairly close to fitting.... and i did not know how close the other tranny's shifters were to being able to fit (or come real close).

that was the angle i was trying to take with my comments - we know im not the most articulate person around. scrambled brain + caveman writing = me you should see me with a crayon; i'm awesome.

BTW, you are in a small group of folks (M.Y., Joe, etc) whose posts i read just for reading's sake, cuz the info you provide is so good, even if i could care less about the topic).
i remember awhile back that i was shocked to find out how old you are - i thought you were an old timer. you sure sound like one (total compliment).

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Jun 22, 2004

#8

• Jun 22, 2004

• #8

:OT: Thanks..I turn the BIG 28 in just 6 days...lol

Building and racing these things forced me to learn, we (dad and I) hope to open a shop full time in the future, atleast that is the goal. I've been building motors and bolting on parts for awhile now, and beleive I've came across some weird ****. Last year was a big year for me for sidework/projects build quite a few cars locally and I am in the midst of 2 currently, not counting my beast. I have had EVERY bolt out of my 91GT, nothing is factory tight anymore, and to be honest most of the time I do not even have to think about bolt size, they just seem to come to me now. Here check this out www.cardomain.com/id/rnhperformance2

I've seen things on this 94 Cobra I'm working on that I thought were not possible so nothing surprises me anymore...I have a tons of hours in this car.


Now back to the shifter

The T-45 is close to the T-5 I believe...

 

curtg21

New Member

May 4, 2004

12

0

0

sarasota,fl

Jun 23, 2004

#9

• Jun 23, 2004

• #9

I have backed the bolts all the way out and the shifter no longer touches. Also, if the shifter itself says T-5/T-45, it is the correct one.right?

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Jun 23, 2004

#10

• Jun 23, 2004

• #10

curtg21 said:

I have backed the bolts all the way out and the shifter no longer touches. Also, if the shifter itself says T-5/T-45, it is the correct one.right?

Click to expand...

Does it go into gear better or the same? Yes, sounds like correct shifter.

 

19stang87

New Member

Apr 29, 2003

134

0

0

WoodStock,GA

Jun 23, 2004

#11

• Jun 23, 2004

• #11

ok back again u said u favor the PRO 50 over this one how come and how does the extra spring tension feel on the UPR piece......... i wont jump on yur thread anymore curtg21

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Jun 23, 2004

#12

• Jun 23, 2004

• #12

The Pro 5.0 I feel has the strongest feel to it and goes into gear very, easily the dogleg is gone from 3rd gear as well.

The Steeda and UPR shifters use a spring to help guide it into gears which also makes it easy to use, and they are also very good.

 

curtg21

New Member

May 4, 2004

12

0

0

sarasota,fl

Jun 23, 2004

#13

• Jun 23, 2004

• #13

no change, still not working properly.

 

B

blk92stangg

New Member

Jan 30, 2004

583

0

0

Hawaii

Jun 23, 2004

#14

• Jun 23, 2004

• #14

could you elaborate a bit? Does it grind going into gear? Does it even go into gear? Is the car running when you do it? Do you have a short gear lever? Does the shifter lever move freely when it is out of the car? It's possible the shifter is defective, and something is inhibiting the the pivot from moving.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jun 24, 2004

#15

• Jun 24, 2004

• #15

i think we might want to make sure the point of clutch engagement is on track too, at this point. are you engaging right off the floor, when it does work?

 

BStevens

Founding Member

Aug 28, 2001

127

0

16

Grand Rapids, MI

Jun 24, 2004

#16

• Jun 24, 2004

• #16

19stang87 said:

not to steal this from ya but how are those UPR shifters i want to get one soon....

Click to expand...

I bought one of the UPR Blue Thunder shifters at WFC5, installed it right at the track. Within 30 minutes, stupid back end bolts It worked like a charm on my 89 GT. I got rid of that car. Of course you need to adjust your gear stops. But hey, its a good investment, quality shifter, and its cheaper than most other ones