V3 Almost!
- Thread starter smkshw
- Start date
Car is back together and running,didnt post pics because it was exact same thing as last time....lol
Now that i know it runs,and the head gasket seems to be holding,im just waiting for my 60lbs injectors,and 3.80 pulley,then back to the tuner i go!....im hoping this pulley gives me less boost this time also?!
Now that i know it runs,and the head gasket seems to be holding,im just waiting for my 60lbs injectors,and 3.80 pulley,then back to the tuner i go!....im hoping this pulley gives me less boost this time also?!
stang89bidges
Advanced Member
stang89bidges
Advanced Member
stang89bidges
Advanced Member
$65 a piece, wow, I just went broke thinking about them. What methods did you use getting your block clean enough for them to seal right?
Sent from my Samsung Note 4 using Tapatalk
Sent from my Samsung Note 4 using Tapatalk
.041 yes....tuner said im fine,so i rolled with it.
I was unsure about the mls myself,wanted to run the 9333s again but i figured to try these since tuner recommended them.
I saw a few used blocks at the machinists shop that looked exactly like mine,asked if he thought the felpro mls would seal them,he said yes,mine didnt have really deep scratches on the block so i gambled,and so far its holding,put them on dry,80 on bottom of head 90 on top...clean oil and water is all i want at this point!...lol,running great also.
See what happends after the final tune i guess,going less boost and less hp.
stang89bidges
Advanced Member
I will....drove it around a bit with no boost but,so far everything is working flawlessly.....ill report back after the final dyno...
Jason 302
10 Year Member
I seen where you had to buy a smog pump delete pulley kit in order to run your accessory belt. I did away with my smog pump years ago and can't remember how the thing bolted on or where any of my mounting hardware is. Did you need this little smog pump bracket or does the delete kit bolt right onto the vortech setup.
A little update before the tune this fri...i now have a 3.80 pulley on,and 60lbs injectors installed,only 
ty thing is i have to tow it to the tuner this time,its running really rich and idle sucks ass now...im wondering what my boost is going to be with the 3.80 on now,im thinking 6-7 psi maybe?
ty thing is i have to tow it to the tuner this time,its running really rich and idle sucks ass now...im wondering what my boost is going to be with the 3.80 on now,im thinking 6-7 psi maybe?
Jason 302
10 Year Member
stang89bidges
Advanced Member
Yup, vortech kit comes with all mounting hardware and brackets which actually relocate the alternator under the smog pump.
Sent from my Samsung Note 4 using Tapatalk
Sent from my Samsung Note 4 using Tapatalk
Jason 302
10 Year Member
Cool. I knew all that got relocated, but I was worried I was going to have to hunt down some hardware and that little bracket for the smog pump delete kit.
Mine bolted up,but with the delete pulley i had to bend the braket straight for it to work....
Hey guys,its been a while,but happy to report my ride is in full working order finally!
This is where it was at before i changed the injectors,10psi,and still with the head leak!
This is where it was at before i changed the injectors,10psi,and still with the head leak!
And after all my head aches,i decided to go with max 7psi to be safe for now,i upgraded to a aem 2 stage meth kit,and changed out my crap msd distributor to a stocker....
So,i did drive it with multiple tunes lol,of coarse it was more explosive before,but im just happy its working perfectly now!....and its respectable still cant complain!....the felpro mls gaskets worked great also,im glad for that!
