Valve cover fitment. Mootang get in here!

i have the rpm II and i ground about a 1/4 inch off of the egr. and they fit perfect with no spacer on the intake.

also if your intake just barely hits the underneath of your hood you can cut a portion of the bottom layer where you need extra clearence. just don't cut into the top of the hood. there is about a half inch gap between the two layers so i managed to do it with out any problems.

mootang said:

also if your intake just barely hits the underneath of your hood you can cut a portion of the bottom layer where you need extra clearence. just don't cut into the top of the hood. there is about a half inch gap between the two layers so i managed to do it with out any problems.

Click to expand...

Yea, this is what I did until the cobra r arrived and it worked great!!

the metal below the bottom bolt for the egr is where you grind it down. you have to grind the egr and the part where it bolts up on the intake elbow adaptor.

i also need help with my vc's!! i just installed my intake but i couldnt put the vc's on due to the passenger side hitting the alternator...i could of continued trying but it was getting late and i needed teh car to up and running by the next day....i would like to put them on though...anybody care to shine in???

which ones do you have?

i got the ford racing tall covers...ive heard i got to rotate the alt or something like that

ask rio5.0

he has them and i remember him talking about having to do something to make them fit. but i don't remember what it was.

thanks moo...we should grab lunch one of these days since your relatively close..wanna check out your stang

this should help you out a little! i did a quick search for you using rio's name

http://forums.stangnet.com/showthread.php?t=545133

better make it quick!

i'm leaving in august for boot camp.

CManT1914 said:

I just wanted to make sure the VC's I bought will fit under my cobra intake. They measure 3 11/16" tall. Mootang, you said you use these, did they fit under your intake just fine? It looked like a tight fit last night when I was looking. I have a 1" phenolic spacer for the intake, but I'm not sure if it will fit under the stock hood. Let me know! thanks
-Chris

Click to expand...

Well bro, if your 1" doesn't fit PM me, i've got a GT40 3\8" spacer. Is it the darned EGR flange interfering with the VCs?
Tim