• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Valve guide replacement

  • Thread starter Thread starter stevesLX
  • Start date Start date Mar 14, 2007

stevesLX

Member
Nov 12, 2006
373
0
16
cincinnati
Mar 14, 2007
#1
  • Mar 14, 2007
  • #1
As most of you are aware I have been having valvetrain noise ever since I put my motor back together 4 weeks ago. So with no results after replacing lifters and pushrods and rockers I am going to spend more money and replace the valve guides. I ask myself why and I answer because I dont know what else could be causing this noise. I had new seals put in and a 3 angle valve job done along with .007 taken off the heads. I have tried shorter and longer push rods and shims also and I still have noise. Can I replace the valve guides myself or do I need to take it back to the machine shop? These are factory heads on 302.
 
9

95_5.0_stang

New Member
Apr 16, 2005
172
0
0
Lansing, MI.
Mar 14, 2007
#2
  • Mar 14, 2007
  • #2
stevesLX said:
As most of you are aware I have been having valvetrain noise ever since I put my motor back together 4 weeks ago. So with no results after replacing lifters and pushrods and rockers I am going to spend more money and replace the valve guides. I ask myself why and I answer because I dont know what else could be causing this noise. I had new seals put in and a 3 angle valve job done along with .007 taken off the heads. I have tried shorter and longer push rods and shims also and I still have noise. Can I replace the valve guides myself or do I need to take it back to the machine shop? These are factory heads on 302.
Click to expand...

I need to know this also. How hard is it to do valve guides?
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Mar 14, 2007
#3
  • Mar 14, 2007
  • #3
u need to take the heads off, take dissamble them, take out the valves and all that good stuff. Depending on what kind of guides you want to put in depends on if you can maybe do it yourself but I wouldnt count on doing it yourself tho. You can put in normal guides in or put in bronze liners which are real thin but alot easier to install then the other kind but still need certain tools to put them in. I would have a shop do it ONLY when you thats the problem for sure or just start saving up for some GT40's or something, you can find them for 300 bucks or less.


I havent seen any of your threads so idk of the sound ur talking about. It sounds like it would be a waste of time and money though, I dont see how guides would make a sound, if they were worn you would be having alot of blue smoke at startup and oil burning problems. Post a link on one of ur threads about it

Maybe include one of ur other threads and that will help.
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Mar 14, 2007
#4
  • Mar 14, 2007
  • #4
This is strictly a machine shop task. Oem guides are simply holes in the head. New ones require drilling the giude/hole oversize and pressing in a new sleeve/guide with the correct inside diameter. It could be done at home, but you need allthe tools and some skill.
 
You must log in or register to reply here.

Similar threads

B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
222
Fox 5.0 Mustang Tech Tuesday at 10:26 PM
AeroCoupe
Fox Valve Spring Kit PAC-1219X. Help finding needed additional parts.
  • 93gtmustang
  • Jul 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
548
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 31, 2026
93gtmustang
G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
758
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
622
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?