• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

valves hanging open

  • Thread starter Thread starter stevesLX
  • Start date Start date Apr 3, 2007

stevesLX

Member
Nov 12, 2006
373
0
16
cincinnati
Apr 3, 2007
#1
  • Apr 3, 2007
  • #1
O.K. I took my car back by the machine shop today and had 3 differn't guys listen to it run. I have had lifter noise since I put it back together. These are stock heads which had a 3 angle valve job done to them. 89 302. All three said its valves hanging open and not allowing the lifter to pump all the way up. They are telling me I need to shim my pushrods. Right now I have .045 preload. I have some shims for pedestal trockers from crane cams and they are .030 and .060. If I put a .030 shim in my preload will be down to like .010 -.015. I know Crane Cams says preload should be .020-.060. They say to do that and the valves will shut and the lifters will pump up and all my ticking will go away. Its quiet at idle but if you rev it up or drive it it sounds like a steam train. Does what they are telling me sound right or not?
 

stevesLX

Member
Nov 12, 2006
373
0
16
cincinnati
Apr 3, 2007
#2
  • Apr 3, 2007
  • #2
anybody know
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
Apr 4, 2007
#3
  • Apr 4, 2007
  • #3
http://static.summitracing.com/global/images/instructions/fms-m-6564-a351.pdf

This link says .020 to .060 as well. You might need longer pushrods. Did you use a length checker on these?
 
You must log in or register to reply here.

Similar threads

H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
622
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
744
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
2K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
Resolved Noisy Valvetrain
  • PonyGTrider
  • Jun 15, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
5K
Fox 5.0 Mustang Tech Jun 19, 2024
PonyGTrider
O
Sooty/Oily Front Engine & Pulleys
  • ozenator
  • Jun 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
542
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 22, 2026
Blackhawkxx
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?