• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Vibration from 2500 or 3k up to redline

  • Thread starter Thread starter haleygotastang
  • Start date Start date Apr 13, 2005
H

haleygotastang

New Member
Apr 9, 2005
7
0
0
Apr 13, 2005
#1
  • Apr 13, 2005
  • #1
I have a vibration seemingly in the rear of the car.. no matter wether I stomp it through the rpm range or just slowly go up it vibrates pretty bad... I'm new to mustangs... Its an 88 gt 5.0 five speed... it is out of alignment and could probably use tire balancing but the vibration seems much more than that... please help me w/some ideas... thanks ahead of time
 

dkins419

New Member
Nov 14, 2004
187
0
0
Michigan
Apr 13, 2005
#2
  • Apr 13, 2005
  • #2
drive shaft maybe?
 
H

haleygotastang

New Member
Apr 9, 2005
7
0
0
Apr 13, 2005
#3
  • Apr 13, 2005
  • #3
I thought drive shaft... but I also think it could be a tranny mount.. b/c if I get on it hard in first when I go to shift it feels like something drops
 
M

Mark89coupe

Member
Apr 5, 2005
206
0
16
Apr 13, 2005
#4
  • Apr 13, 2005
  • #4
I would pull the drive shaft and check it and the slip yolk. Then change the tranny mount.
 
X

x2cstang

New Member
May 7, 2004
25
0
0
Des Moines, Iowa
Apr 13, 2005
#5
  • Apr 13, 2005
  • #5
Have you looked at the torque boxes? If it feels like something is droping when you shift I had that same problem, I put in battle boxes and it went away. The vibration could be tranny mounts, drive shaft.
 
H

haleygotastang

New Member
Apr 9, 2005
7
0
0
Apr 14, 2005
#6
  • Apr 14, 2005
  • #6
Where is this tq box you speak of???? What exactly should I be looking for in the driveshaft and slip yoke....
 

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
Apr 14, 2005
#7
  • Apr 14, 2005
  • #7
Sounds like a bent drive shaft or maybe if you're lucky one of the four bolts that mounts driveshaft to rearend has come loose. Check that first.

DC
 
You must log in or register to reply here.

Similar threads

S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
668
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
586
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
300
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
347
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
F
Resolved Stumble issue upon acceleration (1987 GT)
  • FoxDude87
  • Sep 16, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
54
Views
3K
Fox 5.0 Mustang Tech Dec 3, 2024
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?