• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

VT cams?

  • Thread starter Thread starter kuwait
  • Start date Start date Aug 5, 2005

kuwait

Member
Mar 31, 2005
194
0
17
Aug 5, 2005
#1
  • Aug 5, 2005
  • #1
i was woundering if anyone has the stage 1 cam , what do i have to change in the engine ?
or should i just get the cams only? and will i need the new springs?
and what about the stock rockers? do i need to change them?
thanks
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Aug 5, 2005
#2
  • Aug 5, 2005
  • #2
Clicky

This is my writeup on VT stg 1s. Feel free to post in it if you have Qs at anytime. All you need is the cams, lube, skillzzz, and time.
 

csledd

Official Ovary Punching Member
Founding Member
Aug 18, 2001
1,115
1
0
Paducah, KY
Aug 5, 2005
#3
  • Aug 5, 2005
  • #3
where is the video or the dyno graph!!!!!!

 

RageStangX

New Member
Feb 14, 2004
84
0
0
Franklinville,NJ
Aug 5, 2005
#4
  • Aug 5, 2005
  • #4
O yea u knew id be in this category i myself just as hotmustang just got the vt stage 1 cams and didnt get the springs, no u dont HAVE to have them.I dont have my dyno graph with me but my car made 272hp and 294tq on 87 octane doh yea shoulda had 93 but heres a vid:


http://www.putfile.com/media.php?n=MVI_4161
 

kuwait

Member
Mar 31, 2005
194
0
17
Aug 5, 2005
#5
  • Aug 5, 2005
  • #5
*edit* thanks for the great help guys
 

RageStangX

New Member
Feb 14, 2004
84
0
0
Franklinville,NJ
Aug 5, 2005
#6
  • Aug 5, 2005
  • #6
Nope u should be fine with just the cams.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Aug 5, 2005
#7
  • Aug 5, 2005
  • #7
csledd said:
where is the video or the dyno graph!!!!!!

Click to expand...

Me? Well I havnt even sceduled the dyno yet . I work 12hours a day and when I get off, there is no time. Im going to call sunday or monday. #s will be off, as this will be a mustang dyno. If I do video I dont have anyone to host it, and it would take forever for me to email it LOL..... The car kinda sounds *funny*, misses worse than it used to also...so I think I am needing a tune BAD. I am getting a little nervous.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Aug 5, 2005
#8
  • Aug 5, 2005
  • #8
RageStangX said:
O yea u knew id be in this category i myself just as hotmustang just got the vt stage 1 cams and didnt get the springs, no u dont HAVE to have them.I dont have my dyno graph with me but my car made 272hp and 294tq on 87 octane doh yea shoulda had 93 but heres a vid:


http://www.putfile.com/media.php?n=MVI_4161
Click to expand...

Was that untuned? I couldnt imagine a tuner tuning it on 87 lol. What was the A/F BTW. (darn aol, dont want to WAIT on vid) Thanks
 

RageStangX

New Member
Feb 14, 2004
84
0
0
Franklinville,NJ
Aug 6, 2005
#9
  • Aug 6, 2005
  • #9
No he tuned it with the 87 not knowing that the 93 wasnt in the tank lol.He said if i pick up any parts in the near future come back in for a retune and the numbers should be much better then. ...So im nosing around at an accufab plenum and tb combo hehehe
 

trinity_gt

10 Year Member
Jan 31, 2003
3,125
81
99
Canada
Aug 6, 2005
#10
  • Aug 6, 2005
  • #10
RageStangX said:
O yea u knew id be in this category i myself just as hotmustang just got the vt stage 1 cams and didnt get the springs, no u dont HAVE to have them.I dont have my dyno graph with me but my car made 272hp and 294tq
Click to expand...

What was it making before the cams? Got plots of pre- and post-cams overlaid for comparison?
 

RageStangX

New Member
Feb 14, 2004
84
0
0
Franklinville,NJ
Aug 6, 2005
#11
  • Aug 6, 2005
  • #11
No im sorry i dont, unfortunately i wasnt able to get pre and post numbers to compare but its a good 20+rwhp with a tune.Definately worth every penny.
 
You must log in or register to reply here.

Similar threads

D
N/A build on fresh stock 302
  • djcarrot
  • Oct 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
426
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2026
AeroCoupe
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
471
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
1
Crank no start on a turbo and cammed pushrod 5.0
  • 1630stri
  • Sep 2, 2026
  • Digital Self-tuning Forum
Replies
2
Views
203
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
T
Fuel P0193 on a 2003 3.8 v6
  • Treemaster5000
  • Aug 18, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
122
SN95 V6 Mustang Tech Aug 18, 2026
Treemaster5000
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?